- Joined
- Dec 25, 2016
- Messages
- 36
- Motherboard
- Asrock Z270 Fatal1ty ITX
- CPU
- i7 7700K
- Graphics
- MSI GTX 1050 TI Gaming X 4G
- Mac
- Mobile Phone
Fixed.
I would be grateful if you could share your config.plist for my reference. Thank you.
Fixed.
Patch missing, See Post #1:
Step 3b/BCM94352 5 GHz/Handoff
2. Patches
3. Installation
- 10.12 and newer, 5GHz
Note: FakePCIID injects "BCM94352-Airport-Extreme," patch unnecessary
I got my BCM943224 HMS today, but it doesn't work.HMB: with bluetooth
HMS: without bluetooth
I got my BCM943224 HMS today, but it doesn't work.
After reading [Guide] Airport - PCIe Half Mini v2 again, i found out that i need to patch the whitelist within the brcm4360 kext. But still the card isn't recognised. I used Clover hot patching:
View attachment 229584
Is there anything more i need to do to have OSX at least recognise the card?
Also, how can i verify that clover actually patched the correct kext?
The replacement string was obtained by:
admin$ ioreg -l|grep board-id
| "board-id" = <"Mac-94245B3640C91C81">
Sorry Rehabman, I was for a wrong Post, I hope you can help me, in advance thank you very much to all who collaborate to solve my problem.
I have the GMYLE USB Dongle Adapter with BCM20702A3 Chip with Original Firmware Version v14 c4096 and Using the Kexts BrcmPatchRAM2 and BrcmFirmwareRepo.kext in S / L / E upload the firmware version to v5555, My Wifi card is a TP-Link TL-WN881ND With Atheros Chip, My System is The Captain 10.11.6 mi Mac Definition It's MacPro6.1 is a Desktop PC with Intel DZ68DP Mainboard and CoreI7 2600k processor, GB GT740OC Video Card and SSD Hard Disk.
I have Sleep and Wake up, All USB ports work "except USB3"(NEC/Reneseas) and SpeedStep..!
Everything works properly however I can not Activate AirDrop HandOff or Hotspot, I have already tried many patches for clover, in combination with BrcmPatchRam and changing my definition to iMac to Macpro3,1 and nothing ...
Please, what else do I have to do in order for this to work, or is there really no solution for my hardware combination?
This Bluetooth dongle is recommended by Tonymac in its section Buyer's Guide to Today ...!
Thank you very much for your help .. Attach files for if you can help me with the Revision .. in advance many thanks!
Rehabman, Thank You..!
in all descriptions and patches of this tutorial for clover there are none that match the product ID, I have reviewed each combination and applied them but nothing ...! So I send you Clean my Config.Plist to see if with the info you gave with which was the Combination I need ..! Until now I have just uploaded the firmware version of the Bluetooth USB Dongle with the help of your Kext BrcmPatchRAM2 and BrcmFirmwareRepo. Use FakePCIID and FakePCIID_Broadcom_WiFi but neither ..!
I do not know what else to do, I've been in Testing for 6 days!
Thank you Rehabman, it is working now. The patch description in post #1 made me think that i could select between ascii or hex.You entered the patch incorrectly. You must enter the hex bytes that correspond to the board-id.
Patches (ASCII or hex edit, not both)
- 0x4331
- Binary Patch: AirPortBrcm4360
- Find (iMac14,3): Mac-C6EFA63962FC6EA0 or
- 4d 61 63 2d 43 36 45 46 41 36 33 39 36 32 46 43 36 45 41 30
- Replace (ex., iMac14,2): Mac-27ADBB7B4CEE8E61 or
- 4d 61 63 2d 32 37 41 44 42 42 37 42 34 43 45 45 38 45 36 31
- 0x4353
- Binary Patch: AirPortBrcm4360
- Find (MacBookAir5,2): Mac-2E6FAB96566FE58C or
- 4d 61 63 2d 43 36 45 46 41 36 33 39 36 32 46 43 36 45 41 30
- Replace (ex., iMac14,2): Mac-27ADBB7B4CEE8E61 or
- 4d 61 63 2d 32 45 36 46 41 42 39 36 35 36 36 46 45 35 38 43
0x4353 hex reversed, fixed. Thanks.Possibly some copy/paste error.