[Guide] Airport - PCIe Half Mini v2

[DOCBJR]

Rehabman,

I have a different problem. I'm trying to get Handoff working with the built in Bluetooth and an Edimax AC1200UAC WIFI dongle on my NUC 5i5RYH

Built in Bluetooth and the WIFI dongle both work:

Apple Bluetooth Software Version: 5.0.1f7
Hardware, Features, and Settings:
Name: Music MacbookAir 6.2
Address: XXXXXXXXX
Bluetooth Low Energy Supported: Yes
Handoff Supported: No
Instant Hot Spot Supported: No
Manufacturer: Intel
Transport: USB
Firmware Version: 6.4096 (6.4096)
Bluetooth Power: On
Discoverable: Off
Connectable: Yes
Auto Seek Pointing: Off
Remote wake: On
Vendor ID: 0x8087
Product ID: 0x0A2A
HCI Version: 4.0 (0x6)
HCI Revision: 0x1000
LMP Version: 4.0 (0x6)
LMP Subversion: 0x1000
Device Type (Major): Computer
Device Type (Complete): Mac Desktop
Composite Class Of Device: 0x380104
Device Class (Major): 0x01
Device Class (Minor): 0x01
Service Class: 0x1C0
Auto Seek Keyboard: Off
Devices (Paired, Configured, etc.):
iPhone:
Address: XXXXXXXXX
Major Type: Phone
Minor Type: Smartphone
Services: PAN Network Access Profile, AVRCP Device, Handsfree Gateway, Audio Source, MAP MAS-iOS, Wireless iAP, AVRCP Device, Phonebook
Paired: Yes
Configured: Yes
Connected: No
Manufacturer: Broadcom (0x8, 0x6103)
Firmware Version: 0x0A20
Vendor ID: 0x004C
Product ID: 0x7006
Class of Device: 0x02 0x03 0x7A020C
EDR Supported: Yes
eSCO Supported: Yes
SSP Supported: Yes



Edimax AC1200 USB:

Type: Ethernet
Hardware: Ethernet
BSD Device Name: en2
IPv4 Addresses: 10.0.1.55
IPv4:
AdditionalRoutes:
DestinationAddress: 10.0.1.55
SubnetMask: 255.255.255.255
Addresses: 10.0.1.55
ARPResolvedHardwareAddress: XXXXXXXX
ARPResolvedIPAddress: 10.0.1.1
Configuration Method: DHCP
ConfirmedInterfaceName: en2
Interface Name: en2
Network Signature: IPv4.Router=10.0.1.1;IPv4.RouterHardwareAddress=64:a5:c3:61:26:d4
Router: 10.0.1.1
Subnet Masks: 255.255.255.0

I've installed both FakePCIID_Broadcom_wifi.kext and FakePCIID.kext
Continuity Activation Tool says,"No Active Airport card."

I'd really like to get this working.
Thanks

 

[RehabMan]

Rehabman,

I have a different problem. I'm trying to get Handoff working with the built in Bluetooth and an Edimax AC1200UAC WIFI dongle on my NUC 5i5RYH

Not possible with Intel bluetooth and USB WiFi.

 

[DOCBJR]

Is there anything I could add, hardware wise?
Thanks

 

[RehabMan]

Is there anything I could add, hardware wise?
Thanks

Compatible BT (Broadcom based)... might get you part way there. But really handoff does not work that well on hacks regardless.

 

[DOCBJR]

Any suggestions for a Broadcom based BT card and how would I attach it to the computer?

My GA-H87N-WIFI and GIGABYTE GA-170 MX-Gaming 5 both have handoff and Apple watch turn on working fine. So I'm trying for a third, if possible.
Thanks

 

[ccannon0]

I restarted my computer this morning and now my wifi and audio are not working. My wifi shows "WIFI: No hardware installed" even though everything worked before. Any suggestions?

 

[ccannon0]

Ok so I tried

sudo kextcache -system-caches

and

sudo kextcache -system-prelinked-kernel -all-loaded

then restarted. Nothing. The wifi shows up as a device.

 

[toleda]

My wifi shows "WIFI: No hardware installed"

See Problem Reporting, Post #1; attach all requested files

 

[nobodynose]

I'm trying to get an Azurewave AW-CE123H (Broadcom BCM94352HMB) card working in an Intel NUC DC3217BY machine under Sierra. I have successfully installed Sierra, and I installed FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext to /Library/Extensions. But the OS still doesn't see the card (though it is detected in DCPIManager). Attached are the necessary files for debugging, where possible. Thanks for any help you can provide.

 

[ccannon0]

See Problem Reporting, Post #1; attach all requested files

Sorry Toleda. Its attached.

I am on using z170n-wifi (Skylake) with 4352z card.