Contribute
Register
Status
Not open for further replies.
Joined
Dec 30, 2016
Messages
10
Motherboard
Asus Maximus VIII Hero
CPU
i7-6700K
Graphics
Nvidia GTX 1060 6GB
My problem is that i get screen tearing when i boot up and also graphic bugs or glitches when using the mac.

Another problem is that it also does not read my graphics when it is supposed to say "Intel HD 530 Graphics" but it just says "Display 7 MB"

please help.

here is a video of what is happening :

PC Specs:
Intel Core i7-6700k
Nvidia GTX 1060 6GB
16 GB RAM
Sandisk 240 GB SSD
WD 1TB HDD
Asus Maximus VIII Hero

also i am connected from my pc to my monitor with DVI Dual Link.
 
I'm not sure what you're expecting, since there are no drivers for Pascal GPUs.

In case you're planning to use your iGPU in OS X: Did you connect your display to your motherboard instead of connecting to your Nvidia GPU?
oh ok now i just connected it to my hdmi and now i just need to know how to change my vram "7 mb" to something higher such as 1512 or something. thank you!
 
oh ok now i just connected it to my hdmi and now i just need to know how to change my vram "7 mb" to something higher such as 1512 or something. thank you!

the way i did that, when i had the same issue, was removing my "Nvidia conf" from DSDT...
cause it was booting with nvidia conf..

i tried first, install the OS on my test drive, clean install, and put it with Intel HD settings, when i saw that it work without any problem, i reinstall the OS on my main drive, and then install the multicast and create a new DSDT with those working settings..
it solve my problem...
my monitor have 2 HDMI ports, as i'm using a ultra wide monitor, i use GTX1060 on windows, just by switching the input on monitor....
 
the way i did that, when i had the same issue, was removing my "Nvidia conf" from DSDT...
cause it was booting with nvidia conf..

i tried first, install the OS on my test drive, clean install, and put it with Intel HD settings, when i saw that it work without any problem, i reinstall the OS on my main drive, and then install the multicast and create a new DSDT with those working settings..
it solve my problem...
my monitor have 2 HDMI ports, as i'm using a ultra wide monitor, i use GTX1060 on windows, just by switching the input on monitor....

I don't have Nvidia in my DSDT I only have "Rename HDAS to HDEF"
 
Last edited:
My Skylake iGPU works fine without any further configuration, but MultiBeast includes a special config for HD 530 graphics, you could try that out.
how can I get that config?
 
Status
Not open for further replies.
Back
Top