Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

Status
Not open for further replies.
Quick question. When I have lowres internal screen I obviously use SSDT-IGPU.aml. But if i'm planning on using external highres monitor also with displayport, do I have to use SSDT-IGPU-HIRES.aml?
 
Your trackpad is ALPS... not supported by this guide.
Your HDMI is likely attached directly to the Nvidia chip. Not covered by this guide...
As for the shutdown problem, you need customized USB SSDT.
And for the headphone jack, which steps should I take to get it working?
 
Quick question. When I have lowres internal screen I obviously use SSDT-IGPU.aml. But if i'm planning on using external highres monitor also with displayport, do I have to use SSDT-IGPU-HIRES.aml?

External display resolution is irrelevant.
 
Look for different XML for AppleHDA and test.
Already found some XML's on your GitHub but no guide on how to use this in the readme. I don't have that much experience in the hackintosh world.
Code:
https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch/tree/master/Resources_ProBook
 
I want to update from 10.12.1 to 10.12.2, should I do anything special? Would some things not work after the update ? Thanks
 
Already found some XML's on your GitHub but no guide on how to use this in the readme. I don't have that much experience in the hackintosh world.
Code:
https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch/tree/master/Resources_ProBook

Those are the XML that is already part of the guide...
 
I want to update from 10.12.1 to 10.12.2, should I do anything special? Would some things not work after the update ? Thanks

You should be able to update from the App Store.
 
This is about the laptop #3 on my signature. Lowres screen 1366x768.

I started from the scratch, deleted partitions and installed El Capitan. I didn't have external monitor plugged at all. It seems to me that there is some incompatibility problem with 2570p and UEFI hot patch scripts.

There is no problems with the USB Clover, problem begins when i have completed the post install steps and reboot with the final post install Clover. I can see the Apple logo and loading bar, and almost at the end of the loading bar when logon should appear, screen fades to black. There is no crash, If I type the password and enter, I can hear from the HDD sound that OS X goes into desktop.

Because of that I am unable to get error reporting files like ioreg when using the final Clover that has post install competed. So I have attached ioreg + others when I booted from USB installer Clover. Also I attached final post install Clover, so you can see what the scripts did and also there is a copy from console that has all the steps that I did to create it.

I hope you could take a look at these, as I have no idea what the problem might be. The config.plist has "0x01660004" on kexts to patch section, is that ok or should it be "0x01660003" because I have lowres screen?
 

Attachments

  • APPLEHDA_XML.zip
    971 bytes · Views: 71
  • CONSOLE_POST_INSTALL_STEPS.zip
    5.9 KB · Views: 77
  • IOREG.zip
    531.4 KB · Views: 77
  • KEXTCACHE.zip
    1.1 KB · Views: 63
  • KEXTSTATS.zip
    1.1 KB · Views: 82
  • PATCHMATIC.zip
    51.3 KB · Views: 68
  • POST_INSTALL_CLOVER.zip
    1.4 MB · Views: 70
  • USB_CLOVER.zip
    1.4 MB · Views: 77
This is about the laptop #3 on my signature. Lowres screen 1366x768.

I started from the scratch, deleted partitions and installed El Capitan. I didn't have external monitor plugged at all. It seems to me that there is some incompatibility problem with 2570p and UEFI hot patch scripts.

There is no problems with the USB Clover, problem begins when i have completed the post install steps and reboot with the final post install Clover. I can see the Apple logo and loading bar, and almost at the end of the loading bar when logon should appear, screen fades to black. There is no crash, If I type the password and enter, I can hear from the HDD sound that OS X goes into desktop.

Because of that I am unable to get error reporting files like ioreg when using the final Clover that has post install competed. So I have attached ioreg + others when I booted from USB installer Clover. Also I attached final post install Clover, so you can see what the scripts did and also there is a copy from console that has all the steps that I did to create it.

I hope you could take a look at these, as I have no idea what the problem might be. The config.plist has "0x01660004" on kexts to patch section, is that ok or should it be "0x01660003" because I have lowres screen?
Out of curiosity, when you said it booted and you can see evidence of the desktop loading via the HDD, did you try increasing your brightness? Most laptops including mine after a fresh install (where OS X was never touched by the laptop), the brightness will be set to 0, and you'll need to increase the brightness to set the values in the EFI NVRAM.
 
Status
Not open for further replies.
Back
Top