[Update] Sierra on the Skylake H170N-WIFI

[rishi44]

Thank you

The Nvidia GT950 works now with Sierra.
As nvda_drv=1 option seems to be useless now, is it possible to disable it before booting OS X ?

Wifi seems much harder. As you have same card as mine, is your Wifi working now ?


Sleep works on my hackintosh.

what did you do to get sleep working? For WiFi, I followed @toleda thread and installed a arpt SSD he recommended. Mine was for ARPT06 and I deleted the Fake PCIID and Fake PCIID Broadcom kexts. Then added the patches from config plist 120
Refer to this thread
https://github.com/toleda/wireless_half-mini/issues/12
https://github.com/toleda/wireless_half-mini/blob/master/config-bcm94352-120.plist.zip

 

[tof92130]

what did you do to get sleep working? For WiFi, I followed @toleda thread and installed a arpt SSD he recommended. Mine was for ARPT06 and I deleted the Fake PCIID and Fake PCIID Broadcom kexts. Then added the patches from config plist 120
Refer to this thread
https://github.com/toleda/wireless_half-mini/issues/12
https://github.com/toleda/wireless_half-mini/blob/master/config-bcm94352-120.plist.zip

For sleep awake, I did nothing more than what I already did for El Capitan :

https://www.tonymacx86.com/threads/guide-el-capitan-on-the-skylake-h170n-wifi.178197/
Chapter Final Power Saving Setup

 

[tof92130]

For WiFi, I followed @toleda thread and installed a arpt SSD he recommended. Mine was for ARPT06 and I deleted the Fake PCIID and Fake PCIID Broadcom kexts. Then added the patches from config plist 120
Refer to this thread
https://github.com/toleda/wireless_half-mini/issues/12
https://github.com/toleda/wireless_half-mini/blob/master/config-bcm94352-120.plist.zip

For Wifi is it the right procedure ?

you simply delete Fake PCIID and and Fake PCIID Broadcom kexts

where do I apply the path, directly in my /EFI/EFI/CLOVER/config.plist ?

 

[magohata]

Hi i need help with the audio driver installation

My build
Gigabyte H170n Wifi
i7 6700
Corsair Vengeance LPX 16GB(2X8) 2133
Samsung 850 EVO 500GB (SATA)
Intel HD 530 graphics
Internal Intel M.2 wifi (i think to replace in the future) not working


I make a fresh install of macOs Sierra 10.12 and then install the upgrade to 10.12.1
i follow the toledas tutorial for the audio driver installation, its look that works but when i reboot the hackintosh i get kernel panic and i cant login into the Os.

i boot in verbose mode and safe mode and remove the driver from /system/library/extensions
/library/extension

run again Kext Utility and reboot, and i can login in the macOs Sierra but without Sound.



PD: I follow this other threat for fix the glitches with the internal HD 530 graphics
https://www.tonymacx86.com/threads/fix-skylake-menu-bar-glitch-fix.206400/#post-1362789

 

[rishi44]

For Wifi is it the right procedure ?

you simply delete Fake PCIID and and Fake PCIID Broadcom kexts

where do I apply the path, directly in my /EFI/EFI/CLOVER/config.plist ?

Yes all patches apply in your config.plist , i just copied and pasted. but you might also need a ssdt.aml for the wifi card. I used rpt06, but I think you would have to go into IOREG and search RPT and see which one has something under it.

 

[rishi44]

For sleep awake, I did nothing more than what I already did for El Capitan :

https://www.tonymacx86.com/threads/guide-el-capitan-on-the-skylake-h170n-wifi.178197/
Chapter Final Power Saving Setup

I tried the power saving stuff, did you save the CPU ssdt.aml to patched? I even tried the stand-by mode off terminal command and still sleep isn't functioning properly. I can't get it to wake the monitor back up. But I might try to again with disabling darkwake. Do you have any dark wake settings enabled in clover?

 

[rishi44]

Yes all patches apply in your config.plist , i just copied and pasted. but you might also need a ssdt.aml for the wifi card. I used rpt06, but I think you would have to go into IOREG and search RPT and see which one has something under it.

If you want I can send you a copy of what my patches look like in my plist.

 

[rishi44]

Hi i need help with the audio driver installation

My build
Gigabyte H170n Wifi
i7 6700
Corsair Vengeance LPX 16GB(2X8) 2133
Samsung 850 EVO 500GB (SATA)
Intel HD 530 graphics
Internal Intel M.2 wifi (i think to replace in the future) not working


I make a fresh install of macOs Sierra 10.12 and then install the upgrade to 10.12.1
i follow the toledas tutorial for the audio driver installation, its look that works but when i reboot the hackintosh i get kernel panic and i cant login into the Os.

i boot in verbose mode and safe mode and remove the driver from /system/library/extensions
/library/extension

run again Kext Utility and reboot, and i can login in the macOs Sierra but without Sound.



PD: I follow this other threat for fix the glitches with the internal HD 530 graphics
https://www.tonymacx86.com/threads/fix-skylake-menu-bar-glitch-fix.206400/#post-1362789

For your Intel ssd, maybe follow this thread
http://www.insanelymac.com/forum/topic/312803-patch-for-using-nvme-under-macos-sierra-is-ready/
This is what I did to install sierra on my 950 pro. Scroll down a few posts to see the step by step guide.

 

[rishi44]

Hi i need help with the audio driver installation

My build
Gigabyte H170n Wifi
i7 6700
Corsair Vengeance LPX 16GB(2X8) 2133
Samsung 850 EVO 500GB (SATA)
Intel HD 530 graphics
Internal Intel M.2 wifi (i think to replace in the future) not working


I make a fresh install of macOs Sierra 10.12 and then install the upgrade to 10.12.1
i follow the toledas tutorial for the audio driver installation, its look that works but when i reboot the hackintosh i get kernel panic and i cant login into the Os.

i boot in verbose mode and safe mode and remove the driver from /system/library/extensions
/library/extension

run again Kext Utility and reboot, and i can login in the macOs Sierra but without Sound.



PD: I follow this other threat for fix the glitches with the internal HD 530 graphics
https://www.tonymacx86.com/threads/fix-skylake-menu-bar-glitch-fix.206400/#post-1362789

Yea, I also can't get sound functioning. When I tried toledas patch and also saving a ssdt.aml for audio I couldn't log back in and got that circular logo.

 

[magohata]

For your Intel ssd, maybe follow this thread
http://www.insanelymac.com/forum/topic/312803-patch-for-using-nvme-under-macos-sierra-is-ready/
This is what I did to install sierra on my 950 pro. Scroll down a few posts to see the step by step guide.

Thanks but i dont have M.2 SSD, i refer that i keep the original M.2 Wifi card that came with the motherboard, but in the future im going to replace with the broadcom that is compatible