Contribute
Register

[SUCCESS] GA Z97M-D3H, GTX960 2GB

Status
Not open for further replies.
Joined
Feb 22, 2013
Messages
15
Motherboard
Asus Z270G Strix Gaming
CPU
i7-7700T
Graphics
GTX 960
Mac
  1. iMac
Mobile Phone
  1. Android
My Hardware
  • GA-Z97M-D3H.
  • Core i7 4770.
  • GA GTX960 2Gb.
  • Corsair RM 650.
  • Corsair 32GB DDR3

1 Create USB installer with latest Unibeast

2 Boot from USB and install until finish.

3 Restart and setup MacOS for 1st time.

4 Using Multibeast, install :
  • Quick Start > UEFI Boot Mode
  • Drivers > Audio > Realtek ALCxxx > ALC892
  • Drivers > Disk > 3rd Party SATA
  • Drivers > Misc > FakeSMC
  • Drivers > Network > Realtek > RealtekRTL8111
  • Bootloaders > Clover v2.3k UEFI Boot Mode
  • Customize > SSDT Option > Sandy Bridge Core i7
  • Customize > System Definitions > iMac > iMac 14,2
5 Install cudaDriver-8.0.46, WebDriver-367.15.10

6 Reboot

all Working..!!!!

just 1 problem, when my pc goes to sleep, cannot wake it up anymore...sometimes black screen
so far i just disable Sleep to Never at System Preferences
 
*UPDATE*

ok a little help here...

my mac always freeze, hanging with spinning mouse curser
it look like not enough RAM
everytime i open Finder, App, USB....this happen
how to check log why this happen and any idea how to solve it...?
 
My Hardware
  • GA-Z97M-D3H.
  • Core i7 4770.
  • GA GTX960 2Gb.
  • Corsair RM 650.
  • Corsair 32GB DDR3

1 Create USB installer with latest Unibeast

2 Boot from USB and install until finish.

3 Restart and setup MacOS for 1st time.

4 Using Multibeast, install :
  • Quick Start > UEFI Boot Mode
  • Drivers > Audio > Realtek ALCxxx > ALC892
  • Drivers > Disk > 3rd Party SATA
  • Drivers > Misc > FakeSMC
  • Drivers > Network > Realtek > RealtekRTL8111
  • Bootloaders > Clover v2.3k UEFI Boot Mode
  • Customize > SSDT Option > Sandy Bridge Core i7
  • Customize > System Definitions > iMac > iMac 14,2
5 Install cudaDriver-8.0.46, WebDriver-367.15.10

6 Reboot

all Working..!!!!

just 1 problem, when my pc goes to sleep, cannot wake it up anymore...sometimes black screen
so far i just disable Sleep to Never at System Preferences

Attach ioreg. https://www.tonymacx86.com/threads/guide-how-to-make-a-copy-of-ioreg.58368/
 
here u go

On what system is this? GA-Z97M-D3H? XCPM isn't working. AppleIntelCPUPowermanagement is loaded which is wrong for Haswel. AppleLPC isn't loaded neither.
 
On what system is this? GA-Z97M-D3H? : Yes

i. XCPM isn't working : set KernelPm=true.?
ii. AppleIntelCPUPowermanagement is loaded which is wrong for Haswel : should i put NullCPUPowerManagement or create SDST..?
iii. AppleLPC isn't loaded neither : i need to edit config.plist on appleLPC.kext and put dev id on that...?
 
On what system is this? GA-Z97M-D3H? : Yes

i. XCPM isn't working : set KernelPm=true.?
ii. AppleIntelCPUPowermanagement is loaded which is wrong for Haswel : should i put NullCPUPowerManagement or create SDST..?
iii. AppleLPC isn't loaded neither : i need to edit config.plist on appleLPC.kext and put dev id on that...?

Press F4 at Clover boot. Attach Clover folder remove themes ZIP. Attach ioreg.
 
i need clean install again...HDD bad sector....
replacement new one....
 
here u go...
I already patch kernel, still XCPM is not loaded
 

Attachments

  • CLOVER.zip
    1.6 MB · Views: 156
  • Takashi’s iMac.ioreg
    2.7 MB · Views: 167
here u go...
I already patch kernel, still XCPM is not loaded

Config is incorrect. Use the config i provide. X86PlatformPlugin isn't loaded. AppleLPC isn't loaded. AppleIntelCPUPowermanagement isn't loaded which indicates XCPM is in use. You need to get AppleLPC & X86PlatformPlugin loaded. Use SSDT-LPC from my fork and put SSDT-LPC in EFI/Clover/ACPI/patched. You also need to generate a SSDT for Powermanagement. You have a lot of work to do. Once you've done this attach ioreg. https://github.com/VoiletDragon/Z-H97N-WIFI-Patches
 

Attachments

  • config.plist
    3.8 KB · Views: 322
Status
Not open for further replies.
Back
Top