Contribute
Register

[solved] IdeaPad 700-15ISK Can't boot into OS X Installer

Status
Not open for further replies.
Thank you for your clover.zip .I have the same laptop with you .So I install te system successfully eith your config
 
HI host!
My hardware is equal to yours,but i have no SSD and CPU : i5 6300HQ GHz;VGA:Intel HD 530+ Nvdia 950 ;Windows 10 installed .From the error meassge seen to be Vga probrem?!But i turn off nvdia VGA in BIOS as well.
Anybody can help me frigure it out !Thx

檔案_000.jpeg
 
HI host!
My hardware is equal to yours,but i have no SSD and CPU : i5 6300HQ GHz;VGA:Intel HD 530+ Nvdia 950 ;Windows 10 installed .From the error meassge seen to be Vga probrem?!But i turn off nvdia VGA in BIOS as well.
Anybody can help me frigure it out !Thx

View attachment 215268

Your panic is due to failure to set DVMT-prealloc as per FAQ.
 
Thank you for your response, let me try a while!!
 
Your panic is due to failure to set DVMT-prealloc as per FAQ.

I might not clever as i thouht!
First I follow the FAQ and i didn't do anything the DVMT-prealloc has been adjust to 128MB,but i still stop at same position!
Second,patched IOKit framework (to remove pixel clock limitations),i think the "clover.zip" has been exist right ?!
So,Is there anyelse i didn't down ?
 

Attachments

  • 未命名.jpg
    未命名.jpg
    87.1 KB · Views: 213
I might not clever as i thouht!
First I follow the FAQ and i didn't do anything the DVMT-prealloc has been adjust to 128MB,but i still stop at same position!
Second,patched IOKit framework (to remove pixel clock limitations),i think the "clover.zip" has been exist right ?!
So,Is there anyelse i didn't down ?

You clearly did not read the FAQ.

IMPORTANT!: Contrary to many of the guides you will read, Windows is NOT a valid way to determine what DVMT-prealloc is set to. There is no correlation, especially with Windows 10.[/quote
 
You clearly did not read the FAQ.
HI RehabMan, after a while,I cheated the dvmt-prealloc (I am not sure i success patched or not)but i still can't enter install screen!
I use the poster "cover" File and i didn't adjust any parameter, Can u give a assitant,plz!!
 
HI RehabMan, after a while,I cheated the dvmt-prealloc (I am not sure i success patched or not)but i still can't enter install screen!
I use the poster "cover" File and i didn't adjust any parameter, Can u give a assitant,plz!!

Using the minStolenSize patch instead of setting DVMT-prealloc is not recommended.

Your profile is not filled out. Please fix.

If you have an issue...
Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Maybe i found problem but i don't know to solve!
I can't patch My DVMT!
When i enter EFI and type "setup_var 0xD9 0x3",it show me error message "Doesn't match".
After that i reboot and watch the file "Setup_PE32_image_section_body IFR.txt"
And i found there have so many "0xD9" in bios Variable show Below:
So i think this is the reason i can't patch DVMT!!
0x5423C Setting: DVMT Pre-Allocated, Variable: 0xD9 {05 91 56 10 7A 10 B9 01 02 00 D9 00 10 10 00 FE 00}
0x5424D Default: Other {5B 85 00 00 08}
0x54252 Value {5A 82}
0x54254 Variable 0x2 equals value in list (0x73, 0x74) {14 8A 02 00 02 00 73 00 74 00}
0x5425E 64 Bit Unsigned Int: 0x1 {45 0A 01 00 00 00 00 00 00 00}
0x54268 64 Bit Unsigned Int: 0x2 {45 0A 02 00 00 00 00 00 00 00}
0x54272 Conditional {50 02}
0x54274 End {29 02}
0x54276 End {29 02}
0x54278 End {29 02}
0x5427A Option: 0M, Value: 0x0 {09 07 57 10 00 00 00}
0x54281 Option: 32M, Value: 0x1 {09 07 58 10 30 00 01}
0x54288 Option: 64M, Value: 0x2 {09 07 59 10 00 00 02}
0x5428F Option: 96M, Value: 0x3 {09 07 5A 10 00 00 03}

0x5D910 Setting: ASPM, Variable: 0xD9 {05 91 5A 05 63 05 60 05 05 00 D9 00 10 10 00 04 00}
0x5D921 Option: Disabled, Value: 0x0 {09 07 04 00 00 00 00}
0x5D928 Option: L0s, Value: 0x1 {09 07 64 05 00 00 01}
0x5D92F Option: L1, Value: 0x2 {09 07 65 05 00 00 02}
0x5D936 Option: L0sL1, Value: 0x3 {09 07 66 05 00 00 03}
0x5D93D Option: Auto, Value: 0x4 {09 07 EB 0E 30 00 04}
0x5D944 End of Options {29 02}

0x62BBC Setting: Sensor Model, Variable: 0xD9 {05 91 9A 09 99 09 63 07 01 00 D9 00 10 10 00 FF 00}
0x62BCD Option: IMX135, Value: 0x0 (default) {09 07 82 0A 10 00 00}
0x62BD4 Option: OV5693, Value: 0x1 {09 07 83 0A 00 00 01}
0x62BDB Option: IMX179, Value: 0x2 {09 07 84 0A 00 00 02}
0x62BE2 Option: OV8858, Value: 0x3 {09 07 85 0A 00 00 03}
0x62BE9 Option: OV2740-IVCAM, Value: 0x4 {09 07 86 0A 00 00 04}
0x62BF0 Option: OV9728, Value: 0x5 {09 07 87 0A 00 00 05}
0x62BF7 Option: IMX188, Value: 0x6 {09 07 88 0A 00 00 06}
0x62BFE Option: IMX208, Value: 0x7 {09 07 89 0A 00 00 07}
0x62C05 Option: OV5670, Value: 0x8 {09 07 8A 0A 00 00 08}
0x62C0C Option: OV8865, Value: 0x9 {09 07 8B 0A 00 00 09}
0x62C13 Option: HM2051, Value: 0xA {09 07 8C 0A 00 00 0A}
0x62C1A Option: User Custom, Value: 0xFF {09 07 8D 0A 00 00 FF}
0x62C21 End of Options {29 02}
 
Thanks!! I will try later...

EDIT: I test your config and kext. Fantastic, It work nice, I only change SMBIOS to Macbook Pro 12.1 to get HDMI out work.

Thank you again and indirectly also to Rehabman

I have a laptop equal to yours but CPU is "i5" and no SSD ,but i can't make it into installer,Fisrt issue i can't patch DVMT with my bios ,i guess might lenovo lock it! so can you share some step to me ? Thx you!!
 
Status
Not open for further replies.
Back
Top