Contribute
Register

Upgrade from El Capitan to macOS Sierra and USB 3.0 don't work

Status
Not open for further replies.
anton56

anton56

Joined
Jul 31, 2011
Messages
64
Motherboard
ASUS Z590 PLUS WIFI
CPU
i5-11400
Graphics
UHD 730
Mobile Phone
  1. iOS
after upgraded from El Capitan to macOS Sierra every seens worrk until connected a USB 3.0 external hard disk.

and nothing appears. reconnect to USB 2.0 port and works.

Tried to reinstal kext with multibeast 8.2.3 and nothing.

My system is a gigabyte Z97-HD3 i5 4690K, 8Gb fury memory, 2Tb Seagate, HD4600 Intel Graphics.
 
anton56 said:
after upgraded from El Capitan to macOS Sierra every seens worrk until connected a USB 3.0 external hard disk.

and nothing appears. reconnect to USB 2.0 port and works.

Tried to reinstal kext with multibeast 8.2.3 and nothing.

My system is a gigabyte Z97-HD3 i5 4690K, 8Gb fury memory, 2Tb Seagate, HD4600 Intel Graphics.
Click to expand...

Same problem here USB 3 drive will not mount in USB 3 port but does in USB 2 port. If I plug a USB2 device (headphones mic etc.). They work fine I can even mount a drive formatted FAT in the USB 3 port.
 
joestanxx said:
Same problem here USB 3 drive will not mount in USB 3 port but does in USB 2 port. If I plug a USB2 device (headphones mic etc.). They work fine I can even mount a drive formatted FAT in the USB 3 port.
Click to expand...

Read post #2.
 
RehabMan said:
Read post #2.
Click to expand...
I read the post but i think i will live with the problem, Since everything else works fine. Perhaps a solution like the one used in el captain will become available at some point.
 
joestanxx said:
I read the post but i think i will live with the problem, Since everything else works fine. Perhaps a solution like the one used in el captain will become available at some point.
Click to expand...

The solution for 10.11 is applicable to 10.12.
 
Hello!)
joestanxx said:
Same problem here USB 3 drive will not mount in USB 3 port but does in USB 2 port. If I plug a USB2 device (headphones mic etc.). They work fine I can even mount a drive formatted FAT in the USB 3 port.
Click to expand...
In El Capitan all ports worked. I read post #2, use FakePCIID_XHCIMux.kext, USBInjectAll.kext
<dict>

<key>Comment</key>
<string>change _OSI to XOSI</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
X09TSQ==
</data>
<key>Replace</key>
<data>
WE9TSQ==
</data>
</dict>
<dict>
<key>Comment</key>
<string>change EHC1 to EH01</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RUhDMQ==
</data>
<key>Replace</key>
<data>
RUgwMQ==
</data>
</dict>
<dict>
<key>Comment</key>
<string>change EHC2 to EH02</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RUhDMg==
</data>
<key>Replace</key>
<data>
RUgwMg==
</data>
</dict>
Usb 3.0 work only with usb 2.0 devices. Help, please
 
Minter said:
Hello!)

In El Capitan all ports worked. I read post #2, use FakePCIID_XHCIMux.kext, USBInjectAll.kext
<dict>

<key>Comment</key>
<string>change _OSI to XOSI</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
X09TSQ==
</data>
<key>Replace</key>
<data>
WE9TSQ==
</data>
</dict>
<dict>
<key>Comment</key>
<string>change EHC1 to EH01</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RUhDMQ==
</data>
<key>Replace</key>
<data>
RUgwMQ==
</data>
</dict>
<dict>
<key>Comment</key>
<string>change EHC2 to EH02</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RUhDMg==
</data>
<key>Replace</key>
<data>
RUgwMg==
</data>
</dict>
Usb 3.0 work only with usb 2.0 devices. Help, please
Click to expand...

Read the Skylake Starter guide, create custom SSDT for USBInjectAll.kext.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top