Contribute
Register

Mac OSX 10.12 with X99 Broadwell-E family and Haswell-E family

Status
Not open for further replies.
thank you for the files. using those,I was able to install and run through the setup. I've run into an issue after installing the Nvidia drivers wherein after booting, I can only see a cursor against a black background. have you run into this issue? I'm on a GTX 970.

I've only experienced the display turning off which is due to the Mac 6,1 definition and the need to patch the display config. However, I haven't experienced the problem you describe.
 
my hard drives are not showing but keyboard is working on same port
 
my hard drives are not showing but keyboard is working on same port

Are you sure you have sufficient power flowing to the USB hard drives?
 
Are you sure you have sufficient power flowing to the USB hard drives?
yes man and also everything is working like charm like bluetooth airdrop nvidia graphic.
actually i updated form 10.11.6 with all dsdt patched in 10.11.6.
also my installation usb is working to on any port
 
the kextes i have in efi clover is
NullCPUPowerManagement.kext
VoodooTSCSync.kext
XHCI-x99-injector.kext
GenericUSBXHCI.kext
IntelMausiEthernet.kext
FakeSMC.kext

and this is my patch

<key>Comment</key>
<string>change 15 port limit to 30 in XHCI kext (100-series)</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
g72M/v//EA==
</data>
<key>Name</key>
<string>AppleUSBXHCIPCI</string>
<key>Replace</key>
<data>
g72M/v//Gw==
</data>
 
I've only experienced the display turning off which is due to the Mac 6,1 definition and the need to patch the display config. However, I haven't experienced the problem you describe.
Yes, I did patch the config file, which renders this issue. Odd. I'll try a reinstall. Thank you for your time.
 
I currently have a working Gigabyte X99-SOC Force, i7 5930k, GTX 980 on Yosemite and haven't been following the X99 developments since I got this setup working. I'm ready to upgrade (fresh install) to Sierra....... Tried the Unibeast 7 installer build and Clover boots.... the Sierra installer stops immediately after "error allocating 0x1192b pages...." and "couldn't allocate runtime area"

I'm looking for some guidance here... I don't understand what the OP is talking about, I think I'm missing some steps or some knowledge since the last time I worked one of these builds.

Thanks!
 
I currently have a working Gigabyte X99-SOC Force, i7 5930k, GTX 980 on Yosemite and haven't been following the X99 developments since I got this setup working. I'm ready to upgrade (fresh install) to Sierra....... Tried the Unibeast 7 installer build and Clover boots.... the Sierra installer stops immediately after "error allocating 0x1192b pages...." and "couldn't allocate runtime area"

I'm looking for some guidance here... I don't understand what the OP is talking about, I think I'm missing some steps or some knowledge since the last time I worked one of these builds.

Thanks!
To solve memory allocation probs i use OsxAptioFix2Drv-free2000.efi instead of OsxAptiodrv provided by clover. I got the same issue without the free2000 version.
 
Last edited:
the kextes i have in efi clover is
NullCPUPowerManagement.kext
VoodooTSCSync.kext
XHCI-x99-injector.kext
GenericUSBXHCI.kext
IntelMausiEthernet.kext
FakeSMC.kext

and this is my patch

<key>Comment</key>
<string>change 15 port limit to 30 in XHCI kext (100-series)</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
g72M/v//EA==
</data>
<key>Name</key>
<string>AppleUSBXHCIPCI</string>
<key>Replace</key>
<data>
g72M/v//Gw==
</data>

You should be using the 9-series patch and not 100. Give that a shot.
 
Status
Not open for further replies.
Back
Top