Contribute
Register

Asus Zenbook Pro UX501VW (Skylake i7-6700HQ, GTX 960M)

Status
Not open for further replies.
I could not find yet a single guide for an Asus Skylake laptop.

I followed the Patching Laptop DSDT/SSDT Guide.

I've compiled the latest iasl61 and also copied it to MacIASL. The good news is that the DSDT and all SSDTs extracted and compiled fine with zero errors out of the box.

I was able to apply the following patches:

"Fix _WAK Arg0 v2"
"HPET Fix"
"SMBUS Fix"
"IRQ Fix"
"RTC Fix"
"OS Check Fix" Windows 8
"Fix Mutex with non-zero SyncLevel"
"Add IMEI"
Rename GFX0 to IGPU

The Asus Zenbook Pro UX501VW was not listed for the Asus N555SL/VivoBook battery patch, but the patch was applied and it compiled sucessfully.

Now, for the issues:

1) Rename B0D3 to HDAU comes up empty with nothing to change. Even doing grep -B3 _ADR.*0x00030000 *.dsl comes up empty

2) There doesn't seem to be an Audio layout. With the Audio layout 12, there was nothing to change

3) USB3_PRW 0x0D, USB3_PRW 0x6D, which one? they both seem to be valid

4) My LPC device id is a14e, which is not listed in the 10.11.5 AppleLPC kext. Seems I need Skylake LPC patch, but it gives me 5 errors at compilation.
** EDIT: ** it now compiled fine with zero errors after applying the rename _DSM to XDSM patch.

I've included all original DSDTs/SSDTs.

Please Jingu attach your clover.zip.
Regards
Ettore
 
I have compiled dsdt but have a error with CPU, please control.
 

Attachments

  • DSDT.aml
    165.9 KB · Views: 211
OK i tried another
 
Sorry, i try again.
 
RehabMan i tried and i verify my DSDT 0 error, but have a problem, the notebook is block in mouse, i remove but nothing; I have add in ApplePLC.kext A14E:8086.
DSC_0097.JPG
 
RehabMan i tried and i verify my DSDT 0 error, but have a problem, the notebook is block in mouse, i remove but nothing; I have add in ApplePLC.kext A14E:8086.View attachment 209553

No idea what you're trying to say.

Looks like you have a USB problem. Please explain exactly what you're trying to do...

Attach EFI/Clover folder as ZIP (omit 'themes' folder).
 
I have in s/l/e the usbInjectall.kext, i remove this kext?
 

Attachments

  • Archivio.zip
    3.3 MB · Views: 171
I have in s/l/e the usbInjectall.kext, i remove this kext?

You didn't explain what you're trying to do. Are you trying to reach the installer? Or have you already installed, and are trying to do something else?

Your Clover/kexts/ is wrong. See guide: http://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

You did not press F4 before collecting EFI/Clover, so it is not possible to see what patches you may have applied to DSDT.aml.

Please fill out your profile correctly...

Reminder...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Status
Not open for further replies.
Back
Top