Contribute
Register

How To Install OS X Yosemite Using Clover

I used the clover installer (Step 13. down to ) on my working Mac Pro HDD, I didn't select the USB HDD and it installed on my mac pro HDD witch is my boot HDD. Will this do anything when I reboot my Mac Pro? This is on a original Mac Pro. thanks. I have attached a photo.

Tim
 

Attachments

  • Screen Shot 2016-02-26 at 11.29.08 AM.png
    Screen Shot 2016-02-26 at 11.29.08 AM.png
    118.3 KB · Views: 278
hello ! I don't find the DSDT.aml, file and I have an issue because my mouse is not recognize, and my keyboard is nearly accepted as well... How can I solved this problem, because I can't get through the installation

Thank you very much
 
To answer my own question, no i shouldn't. And HD3000 is less of a nightmare - I have full graphics now, about this Mac is just showing Intel HD Graphics 2000 512 MB instead of 3000 - any ideas anyone???

Im having the same problem here. In addition to displaying incorrectly, I am seeing random blocks on my screen. Change the gram to 480 or other settings didn't help.
 
Here is my system info. Im having issues trying to install Yosemite. I get an error that says "Error starting PC will restart in 5 secounds
Item Value
OS Name Microsoft Windows 10 Home
Version 10.0.10586 Build 10586
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ELITELAPTOP
System Manufacturer TOSHIBA
System Model Satellite C55-B
System Type x64-based PC
System SKU PSCMLU
Processor Intel(R) Celeron(R) CPU N2840 @ 2.16GHz, 2159 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date TOSHIBA 1.30, 6/11/2014
SMBIOS Version 2.8
Embedded Controller Version 1.30
BIOS Mode UEFI
BaseBoard Manufacturer TOSHIBA
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State Off
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "10.0.10586.0"
User Name EliteLaptop\David Rengifo
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.89 GB
Available Physical Memory 2.07 GB
Total Virtual Memory 6.76 GB
Available Virtual Memory 4.86 GB
Page File Space 2.88 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes


[Hardware Resources]






[Conflicts/Sharing]


Resource Device
I/O Port 0x00000070-0x00000070 Motherboard resources
I/O Port 0x00000070-0x00000070 System CMOS/real time clock

Memory Address 0xC0000000-0xD0815FFE PCI Express Root Complex
Memory Address 0xC0000000-0xD0815FFE Intel(R) HD Graphics
 
I have seen just a handful of questions about the Clover Configurator "classic" vs "vibrant" edition. Some people want to know the difference and some want to know which version is preferable in which situations. However, I haven't found a single answer to that question on tonymacx86.com nor in Googling that search string to ad infinitum. Is there someone who knows the answers to these questions:

1) What is the difference between Clover Configurator "Classic" and "Vibrant" editions?
and
2) Which version is more ideal under which install environments?
 
I have seen just a handful of questions about the Clover Configurator "classic" vs "vibrant" edition. Some people want to know the difference and some want to know which version is preferable in which situations. However, I haven't found a single answer to that question on tonymacx86.com nor in Googling that search string to ad infinitum. Is there someone who knows the answers to these questions:

1) What is the difference between Clover Configurator "Classic" and "Vibrant" editions?
and
2) Which version is more ideal under which install environments?
Good questions. The answer is I don't know. So I use the Classic, and that's also what's in the Forum Downloads > Community Software section.
 
...Classic, ... what's in the Forum Downloads > Community Software section.

Good to know. Thank you for posting an answer! Anyone else have an experience that could enlighten us further?
 
Editing config.plist file for USB:

Pre-requisites:
  • One of the downloaded config.plist files (start with Standard one)
  • View attachment 109255
  • Clover Configurator (recommended version 2953 or later)


  1. Download config.plist file
  2. Open Clover Configurator
    • File>Import Configuration>select downloaded config.plist
  3. Click Acpi (only if using DSDT, if no DSDT skip to Step 4.)
  4. Click Boot
    • Keep defaults and check box for kext-dev-mode=1
    • Remove "Default Boot Volume" text or replace with your boot volume name
    • Set XMP Detect to No
    • View attachment 108076
  5. Click Graphics
    • If using Intel IGFX/IGPU, accept the default (checked) otherwise uncheck "Inject Intel"
    • View attachment 108077
  6. Run iMessage_Debug and keep terminal window open
  7. Click Rt Variables in Clover Configurator
  8. Click SMBIOS
  9. Close Clover Configurator
  10. Place edited config file in /EFI/EFI/CLOVER directory
Hi Lexone
79187-74626384f23d464b2a7102283afe694f.jpg

In this picture it is unclear whether 5 is above 4 and arrow is to 5 or 4.

Thanks for help
 
Last edited by a moderator:
...When I boot in verbose or safe mode, I get

"ECHI controller unable to take control from bios"
"AppleUSBECHI: unable to obtain ownership"

And after a while, something about missing bluetooth controller, and there I get the stop sign.

Did you try to Enable ECHI Handoff in your motherboard BIOS settings?
 
Hey guys, doest it works on a Macbook White 4.1?
 
Back
Top