[solved] IdeaPad 700-15ISK Can't boot into OS X Installer

[soto2080]

kexts/Others is a typo.sorry.
I download form appstore by my hackintosh desktop.
hardware:Xeon e3 1230v3+Asus z87 expert+GTX770+ALC1150
I used createinstallmedia method to make the bootable usb.

 

[RehabMan]

Try different USB stick. Make sure you have no "extra" USB devices plugged in while booting the installer.

Next time you provide EFI/Clover, please press F4 in Clover prior to collecting it (so ACPI/origin has native ACPI).

 

[soto2080]

Try different USB stick. Make sure you have no "extra" USB devices plugged in while booting the installer.

I will try later,it could took much time due to my low speed network to redownload OS X again．
In those tries above I only plugged the usb stick.


Oh,I found a copy of OS X on my computer.
I think i need to find a usb2.0 stick to make a bootable usb.

 

[soto2080]

I got native ACPI.
This must be the most difficult computer I have seen.

 

[soto2080]

I got native ACPI.
This must be the most difficult computer I have seen.

I tried to disassemble *.aml.
0 Error 2 Warnings
But have no idea what to do now

 

[RehabMan]

I tried to disassemble *.aml.
0 Error 2 Warnings
But have no idea what to do now

Warnings do not matter. Make sure you delete duplicate SSDTs (as per guide). Make sure you use refs.txt (as per guide).

 

[soto2080]

Warnings do not matter. Make sure you delete duplicate SSDTs (as per guide). Make sure you use refs.txt (as per guide).

It's my first time to patch dsdt/ssdt for laptop.
Could you advise what to patch to let it boot into installer?

Attachment is the .dsl process with refs.txt

By the way,I got more warings than just process with iasl -da -dl *.aml.

 

[soto2080]

I placed origin ssdts into patched set Drop oem in config.And It don't stuck at Iousbhostfamily.kext finally.
Now it boot into installer.
I think I will be there again soon,because I never used a skylake platform.

 

[soto2080]

Oh no. VoodooPS2 controller seems to not be working for me.



EDIT:It works well.

 

[soto2080]

Now the problem is it doesn't recognize my hard disks.
One of my hard disk is plugged on sata3,and another is m.2 nvme ssd.
Both of them did't appear in disk utility.
I have tried sata 100 unsupport.kext and Nvme patching,but no lucky.