Contribute
Register

[Guide] Asus UX305CA UHD

Status
Not open for further replies.
HDMI out is working, but I can't get 4K output on my PHL BDM4065 (HDMI 1.4). It's maxed at 2048 x 1080. Any idea why?

I do get 3440 x 1440 on my LG 34UM95.
 
orditeck said:
HDMI out is working, but I can't get 4K video on my PHL BDM4065 (HDMI 1.4).
I do get 3440x1440 on my LG 34UM95.
Click to expand...

4k requires appropriate framebuffer patches (connector must be HDMI type <00 08 00 00>) and will likely require the patch for IOKit (pixel clock patch).

Might be better result with 4k over DP instead of HDMI.

I have no experience with 4k monitors. The "early adopter penalty" is still to high.
 
RehabMan said:
4k requires appropriate framebuffer patches (connector must be HDMI type <00 08 00 00>) and will likely require the patch for IOKit (pixel clock patch).

Might be better result with 4k over DP instead of HDMI.

I have no experience with 4k monitors. The "early adopter penalty" is still to high.
Click to expand...

Thanks for the pixel clock patch. That was an easy one! I installed it, reboot and voila! http://imgur.com/2hQZKt8

Awesome.
 
Will this guide work for the Asus Zenbook flip UX360CA. Same specs, except with touchscreen basically
 
primeboss said:
Will this guide work for the Asus Zenbook flip UX360CA. Same specs, except with touchscreen basically
Click to expand...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
was anyone able to get sleep working?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top