[Guide] Dell Inspiron 15 7559 El Capitan Hackintosh (Dual Boot With Windows)

[nirj11]

I only get one glitch right before the desktop show up. Other then that I have no issues with graphics. It even wakes up in like 2 seconds from sleep. I belive my ig-platform-id is 0x191b0000. It´s already in config.plist in this guide.

Note: I can´t boot with HDMI connected. (Only if I close the lid right after selecting Os X in clover). Be sure to do that too if you have HDMI screen connected upon a boot.
You can connect HDMI after a boot and have 2 screens working at the same time.

I tried to put 0x191b0000 in config.plist but the osx will not boot without the charger, i have to connect it to load the osx and the problem with the flickering lines after sleep still exists..
You can give me your config.plist? It will work? We have the same specs so everything should be fine

 

[sebasriostod]

Double check you followed all steps of the guide...

If you need assist...

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

I will try a fresh install today. Also, I did installed my DJ controller in OS X (Traktor Kontrol S4) it may be the problem.

 

[Johnnnnnnnnnny]

I tried to put 0x191b0000 in config.plist but the osx will not boot without the charger, i have to connect it to load the osx and the problem with the flickering lines after sleep still exists..
You can give me your config.plist? It will work? We have the same specs so everything should be fine

I have the same config.plist that is attached in the guide. Maybe the problem is in post-instalation SSDTs or DSDT.
You may also try to disable sleep in OsX preferences

 

[nirj11]

I have the same config.plist that is attached in the guide. Maybe the problem is in post-instalation SSDTs or DSDT.
You may also try to disable sleep in OsX preferences

Ok i will try to install osx again..
If i disable sleep it will help? Because its not just sleep if the screen will turn off for a second the flickering lines will show up..
BTW i can install windows before the osx?

 

[Johnnnnnnnnnny]

Ok i will try to install osx again..
If i disable sleep it will help? Because its not just sleep if the screen will turn off for a second the flickering lines will show up..
BTW i can install windows before the osx?

You can but I dont´t recommend. The guide is made like this for a reason -->it is the easyest way I know how to hackintosh this laptop. It will not apply for you in all steps if you try to install Windows first.
Note that the disk has to be properly formated with disk utility in order for both OS to coexist properly.

 

[nirj11]

I have the same config.plist that is attached in the guide. Maybe the problem is in post-instalation SSDTs or DSDT.
You may also try to disable sleep in OsX preferences

Ok.. i installed the osx again and now i was able to install windows on the SSD with osx i don't know why 0_0
But the screen problem still there i cant close the screen and open and then keep working i have to restart the laptop everytime..
I need some help to understand what RehabMan told me to do with the FakePCIID..
And please give me your config.plist why is your laptop working perfecty and my not if we have the same specs?
Thanks

 

[sebasriostod]

Double check you followed all steps of the guide...

If you need assist...

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

PLEASE HELP
I got news. I did a completely clean install following exactly the same steps above. Everything was fine until I installed Ableton Live, started playing the demo project, and closed it. I pressed the play key for listening to music in Spotify and then noise suddenly started coming out from my headphones!! I mean, headphones output.

I checked Activity Monitor and my previous CPU issue was gone. But I don't know what's causing the audio issue. Maybe the non-compatible WiFi card?


[EDIT] I think I've discovered a bug here. In this case is not a kext it was a USB 3.0 port with external hard drive that caused that noise. Even if I use Bluetooth nothing happens. Did I maybe patched SSDTs wrong? please help! and... what do you think about this issue @RehabMan?

 

[manoj.admlab]

Ok.. i installed the osx again and now i was able to install windows on the SSD with osx i don't know why 0_0
But the screen problem still there i cant close the screen and open and then keep working i have to restart the laptop everytime..
I need some help to understand what RehabMan told me to do with the FakePCIID..
And please give me your config.plist why is your laptop working perfecty and my not if we have the same specs?
Thanks

Try this, when you open the screen after sleep don't press any keys and press power button to wake. This works for me hope it will be useful to you also.

 

[nirj11]

Try this, when you open the screen after sleep don't press any keys and press power button to wake. This works for me hope it will be useful to you also.

Thank you..I will try it, but most of the time the screen just turned on when i open the screen, i can disable this in settings somewhere? And then i will open the screen and press the power

 

[Johnnnnnnnnnny]

Ok.. i installed the osx again and now i was able to install windows on the SSD with osx i don't know why 0_0
But the screen problem still there i cant close the screen and open and then keep working i have to restart the laptop everytime..
I need some help to understand what RehabMan told me to do with the FakePCIID..
And please give me your config.plist why is your laptop working perfecty and my not if we have the same specs?
Thanks

Here is my whole working CLOVER folder of installed system. I doubt it will help you though.
I have to press power button to wake from sleep too.