Intel HD 4400 Desktop Graphics Fix - Full Support for Alternate CPUs in OS X

[fegasa11]

Use a laptop ig-platform-id... 0xa260006.



Don't boot in legacy mode, but enable legacy (and boot UEFI).

I've tried in ig-platform-id... 0xa260006 and 0xd220003 and with both LVDS screen stays black, however, in HDMI looks perfect.
When it has only 7 Mb the LVDS display looks but, when has the 1536 Mb stays black.
This is what I can not understand. I have also installed FakePCIID.ket and FakePCIID_Intel_HD_Graphics.kext in Library/Extensions

 

[fegasa11]

Use a laptop ig-platform-id... 0xa260006.



Don't boot in legacy mode, but enable legacy (and boot UEFI).

Yes, I have enabled both legacy as UEFI boot.

 

[RehabMan]

I've tried in ig-platform-id... 0xa260006 and 0xd220003 and with both LVDS screen stays black, however, in HDMI looks perfect.
When it has only 7 Mb the LVDS display looks but, when has the 1536 Mb stays black.
This is what I can not understand. I have also installed FakePCIID.ket and FakePCIID_Intel_HD_Graphics.kext in Library/Extensions

You should try injecting EDID.

 

[fegasa11]

You should try injecting EDID.

Hello RehabMan
Even with those, I give up.
I'm hoping that I get a new motherboard. I hope that this will take the LVDS display better.
Thanks for everything.

 

[fegasa11]

Hello RehabMan
Even with those, I give up.
I'm hoping that I get a new motherboard. I hope that this will take the LVDS display better.
Thanks for everything.

You should try injecting EDID.

Hello RehabMan .
I changed the motherboard and still have the same problem.
The point is that by accessing this computer via screen sharing from another with OS X El Capitan have observed the following:
Without graphics acceleration detected me the screen with a resolution of 1920x1080 but only 7mb .
With graphics acceleration ( 0x04128080 + 0xd220003 or 0xa260006 ) screen gives a resolution of 1280x1024 and I think that 's why goes black .
Is there a way that when the system takes control force to a resolution of 1920x1080 ?
regards

 

[RehabMan]

Hello RehabMan .
I changed the motherboard and still have the same problem.
The point is that by accessing this computer via screen sharing from another with OS X El Capitan have observed the following:
Without graphics acceleration detected me the screen with a resolution of 1920x1080 but only 7mb .
With graphics acceleration ( 0x04128080 + 0xd220003 or 0xa260006 ) screen gives a resolution of 1280x1024 and I think that 's why goes black .
Is there a way that when the system takes control force to a resolution of 1920x1080 ?
regards

It is probably an EDID issue.

 

[RoyaleSine]

Hi RehabMan, first of all thank you for all your work.
I am complete new with hackintosh, I have an ASUS b85 Vanguard, Core i3 with hd4400 graphics. Installed El Capitan successfully with last clover version as boot loader.
I tryed everythig mention in this post and other ones about 4400 graphics, I am stuck since 3 days I can't enable full Qe/Ci. Maybe I am getting cofused because on most threads you help people with the mobile version (I have the desktop version), I am confused about injections about mobile and desktop versions, wich should be the correct way to get this working... Also got confused reading old post about doing this in Yosemite version and the tools used.
I am using ketx wizzard, clover configurator, is there any aditional tool I should read about... I saw editing ketx manually... Is that necessary?...
Everytime I tried and failed, I recovered the system removing the fakeid in graphics section at boot time.
Thanks a lot in advance
Sorry for my bad english
Regards

 

[RehabMan]

Hi RehabMan, first of all thank you for all your work.
I am complete new with hackintosh, I have an ASUS b85 Vanguard, Core i3 with hd4400 graphics. Installed El Capitan successfully with last clover version as boot loader.
I tryed everythig mention in this post and other ones about 4400 graphics, I am stuck since 3 days I can't enable full Qe/Ci. Maybe I am getting cofused because on most threads you help people with the mobile version (I have the desktop version), I am confused about injections about mobile and desktop versions, wich should be the correct way to get this working... Also got confused reading old post about doing this in Yosemite version and the tools used.
I am using ketx wizzard, clover configurator, is there any aditional tool I should read about... I saw editing ketx manually... Is that necessary?...
Everytime I tried and failed, I recovered the system removing the fakeid in graphics section at boot time.
Thanks a lot in advance
Sorry for my bad english
Regards

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

 

[RoyaleSine]

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

Thanks for the fast response, attached the information required.

 

[RehabMan]

Thanks for the fast response, attached the information required.

It appears that this ioreg was not collected after booting with FakeID=0x04128086 as is in the config.plist. As if you changed it within the Clover GUI or something...