Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

Status
Not open for further replies.
Maybe your problem is related to USB3 and GenericUSBXHCI.kext. Remove it and test.

Hi ReHabman,

I deleted that kext from /S/L/E/ and everything was working fine (wake up after sleep), as soon as I migrate to the hotpatch setup (following your instructions carefully) my system hungs again. OS version is 10.11.4.

You think that maybe a kext is responsible for this?

My next step is to restore (again) and compare the kexts loaded looking in Kext Wizard. I will compare with the kexts loaded right now with the hotpatch setup.
 
Hi ReHabman,

I deleted that kext from /S/L/E/ and everything was working fine (wake up after sleep), as soon as I migrate to the hotpatch setup (following your instructions carefully) my system hungs again. OS version is 10.11.4.

You think that maybe a kext is responsible for this?

My next step is to restore (again) and compare the kexts loaded looking in Kext Wizard. I will compare with the kexts loaded right now with the hotpatch setup.

Why are you "migrating" to hotpatch? Do a fresh install directly of 10.11.5. Follow the guide exactly as written.
 
hi Rehabman,
just two question on my triple boot 8460p:

- i'm installing an HP Laserjet Color M277, i can setup it on OSX with kext?
or i can download drivers stright from HP?

- can you tell me a safety system cleaner?
i have installed a cleaner , but after cleaning (too much) files and reboot , now my account is gone.
Blank username and blank password

on second point don't worry i have a full ghost of my system, it be useful know a good system cleaner/optimizer and how to setup printer

let me know.
Thanks
 
Why are you "migrating" to hotpatch? Do a fresh install directly of 10.11.5. Follow the guide exactly as written.

I'm migrating to hotpatch because it's the best way to get the latest kexts and install them on my system.

Before restore my Time Machine backup I did try a fresh install in my hard drive (two times, two different El Capitan versions downloaded from AppStore) and had the same problem (system hungs each time comes back from sleep).
 
I'm migrating to hotpatch because it's the best way to get the latest kexts and install them on my system.

Before restore my Time Machine backup I did try a fresh install in my hard drive (two times, two different El Capitan versions downloaded from AppStore) and had the same problem (system hungs each time comes back from sleep).

Install 10.11.5 (current version), download from Mac App Store. Do not do any kind of TM restore. Follow guide in post #1.
 
hi Rehabman,
just two question on my triple boot 8460p:

- i'm installing an HP Laserjet Color M277, i can setup it on OSX with kext?
or i can download drivers stright from HP?

- can you tell me a safety system cleaner?
i have installed a cleaner , but after cleaning (too much) files and reboot , now my account is gone.
Blank username and blank password

on second point don't worry i have a full ghost of my system, it be useful know a good system cleaner/optimizer and how to setup printer

let me know.
Thanks

You just need to plug the printer in OS X, maybe you'll need Mac drivers (download it from hp.com). In my case the printer was installed just plugin the USB cable, later on an HP update came from AppStore. You can always check it in System Preferences/Printer.

To clean your system you can use CCleaner and Malwarebytes for Mac, with these two I clean a lot of systems with good results. Appcleaner is a great application to delete apps and all the files related (it's like a simple uninstaller).
 
Hi Guys 10.11.5 has something diffrent with hdaaudio on hp probook 4540s I changed the to older version of hdaaudio not it work. But still have problem with wifi HP Atheors 9285 AR5B95 Wifi is dectect start scanning but not luck.

Dmesg say
143.130800: ath_chan_set: unable to reset channel 3 (2422Mhz) flags 0x10080 hal status 14
143.137264: ATHR: unknown locale: 60

so the probably problem with locale how to patch that ?

Card worked perfectly on 10.11.4
 
Hi Guys 10.11.5 has something diffrent with hdaaudio on hp probook 4540s I changed the to older version of hdaaudio not it work. But still have problem with wifi HP Atheors 9285 AR5B95 Wifi is dectect start scanning but not luck.

Dmesg say
143.130800: ath_chan_set: unable to reset channel 3 (2422Mhz) flags 0x10080 hal status 14
143.137264: ATHR: unknown locale: 60

so the probably problem with locale how to patch that ?

Card worked perfectly on 10.11.4

Read post #1, "Problem Reporting"
 
Hello. I have a question.

I've installed on an EliteBook 8470p. After clover install system boots, internal camera works perfectly for FaceTime (FT) and Photo Booth (PhB)... After running the scripts per guide, camera no longer works properly, just black - the camera "on light" is on and it appears in USB list. Post script install it works ok in PhB.

The video quality pre script install is excellent - absolutely super detailed, 720p, and smooth with great color and brightness in FT and PhB. Post script run, image is 100% dark in FT, and in PhB it's much lower quality - pixelated, choppy. USB external camera is better, not great.

It's not a big problem really - everything else is working perfectly, just wondering what in the SSDTs that get installed might cause this? USB? I notice that the 8470p is lacking a customized USB SSDT - so maybe it's what's not installed?
 
Hi @RehabMan, I follow your guide in post #1 to install El Capitan 10.11 on my brother's HP Probook 4540s, his laptop has 2 seperate hard disks, one 250GB HDD in caddy bay and one internal 120GB SSD. I intend to install Hackintosh on HDD, before install Hackintosh, I unplugged the SSD to avoid any problem during the installation process and setup BIOS as your guides. Then I created El Capitan USB Installer and succeed in booting to Welcome screen OS X, I used Disk Utility to partition the HDD into 3 partitions, the 1st partition sized 100GB with GPT format for OSX. I chose this partition to install, but this error appear: "OS X could not be installed on your computer because there is not enough free space". I try to re-format HDD many times but still stucked at this step. What should I do? Thanks!
 
Status
Not open for further replies.
Back
Top