- Joined
- Aug 3, 2012
- Messages
- 272
- Motherboard
- H270N-WIFI
- CPU
- 7600K
- Graphics
- RX 570
My bios has that option. Should i enable it?(some BIOS have an option for reversing Fn+Fxx and Fxx keys)
My bios has that option. Should i enable it?(some BIOS have an option for reversing Fn+Fxx and Fxx keys)
I dont need camera and am happy that it doesn't work Can this cause problems when letting the USB2 port enabled?
I thought i have uploaded them, but anyway. I attached again.
I have removed your patched SSDT for layout-id 5, because i use layout-id 3 as mirone said. I hope it was correct by just removing the SSDT and switch the 0 to 3 in clover config.plist. The layout and Platform patches are also removed and not present. I setup new install of macOS and did not use your scripts for installation.
My bios has that option. Should i enable it?
Yes i am. Instead of adapting the ACPI i switch physical the keys ...It doesn't really matter how you set it, but you should be aware of how it affects which keys you need to press for your brightness/volume keys.
Yes i am. Instead of adapting the ACPI i switch physical the keys ...
Figured it out. I do not need any KEY*.aml files in ACPI/patched folder to get it working. Thought i removed all, but the KEY102 was still present ... The keys work out of the box. Sleep, brightness, volume buttons. If you switch the bios option, you can reach the functions without pressing Fn.So it doesn't work if they are switched in BIOS? Is there a note I should add to post #
Maybe you can remove KEY*.aml files from script that they not going to be installed for Elitebook G3 users.Note: added specific support for EliteBook 8x0 G3 Skylake in the repo: https://github.com/RehabMan/HP-ProB...mmit/29b32f675d93db23f14f81be0ca51bd36e7302e9
I have now implemented the SSDT-4x0-G3-Skylake again, but compiled it with layout-id 3. This one is very important to shorten the boot process. Layout 3 takes also place, so i can use it with Mirones AppleHDA. Maybe he is able to help me out with the headphone.Note: No problem temporarily removing the SSDT that injects layout-id (and using Clover for it), but you'll be missing "hda-gfx" and the USWE fix that is specific to the G3.
Figured it out. I do not need any KEY*.aml files in ACPI/patched folder to get it working. Thought i removed all, but the KEY102 was still present ... The keys work out of the box. Sleep, brightness, volume buttons. If you switch the bios option, you can reach the functions without pressing Fn.
Maybe you can remove KEY*.aml files from script that they not going to be installed for Elitebook G3 users.
I have now implemented the SSDT-4x0-G3-Skylake again, but compiled it with layout-id 3. This one is very important to shorten the boot process. Layout 3 takes also place, so i can use it with Mirones AppleHDA. Maybe he is able to help me out with the headphone.
I have noticed some minor bugs:
Sound loss after sleep - what can i do? Noticed the same behavior while using your installation script.
No real sleep after LID close - only if i press Fn+F1 or AppleLogo -> Sleep the systems goes to real sleep.
DisplayPort sound
Hello guys,
i need some help with my hackintosh
I have HP ProBook 450 G3 (i5-6200u Skylake, 256GB SSD, 8GB Ram) with el capitan + clover installed on it already. I know that the wifi card Intel AC-3165 (3165NGW) is unsupported, therefore i'm looking for a replacement. I know it must be a BCM94352Z, but it is not easy to find them, speacially for a good price. I found a DW-1560, it's seems to be the same card, but in the description of this card is always notes, that it does not work with HP. Can i ignore this and buy the card? Or can i use some other card maybe?