Contribute
Register

Razer Blade 14 2014 Hackintosh!

Status
Not open for further replies.
nope... not yet
It boots clover and loads until I reach the OS X installer
I tried with a regular full hd external monitor but it stays black as well

@RehabMan

Requirements for QHD+/UHD displays:
- patched IOKit framework (to remove pixel clock limitations)
Shouldn't I be able to get in OS X install without patching IOKit framework no ?

- DVMT-prealloc set to 96MB or 128MB in BIOS
DONE with a modded BIOS

- Haswell: ig-platform-id 0xa2e0008
- Haswell: framebuffer configuration for 0xa2e0008 patched to match DVMT-prealloc value (Broadwell determines BIOS size dynamically)

what are the values of this for Skylake hd530 systems ?

what SmBIOS should I use ?
 
protom said:
@RehabMan

Requirements for QHD+/UHD displays:
- patched IOKit framework (to remove pixel clock limitations)
Shouldn't I be able to get in OS X install without patching IOKit framework no ?
Click to expand...

If you use a bogus FakeID (such as 0x12345678), yes.

what are the values of this for Skylake hd530 systems ?

what SmBIOS should I use ?
Click to expand...

See guide for config.plist: http://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
Loaded the hd530 config.plist
tried a few different settings
added FakePCIID_Intel_SKL_Graphics.kext.zip
but get stuck here
IMG_0369.JPG
 
protom said:
Loaded the hd530 config.plist
tried a few different settings
added FakePCIID_Intel_SKL_Graphics.kext.zip
but get stuck here
View attachment 200267
Click to expand...

FakePCIID_Intel_SKL_Graphics.kext is deprecated. Its functionality was rolled into FakePCIID_Intel_HD_Graphics.kext.

See here:

As for your issue, the hardware in your profile is not supported by Mavericks (this forum). You need to install 10.11.5.

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Pay attention the Skylake info in the FAQ. It is important.
 
I did use 10.11.5 to create my installer
 
Ok... Need some help.

Where I am: I have a 2014 Razer Blade 14 and have successfully dual booted windows 10 and Mojave. Boot loader doesnt work but I can use the clover flash drive to access Mojave.
Keyboard works fine.
Touchpad does not work. Using usb mouse.
ethernet dongle does not seem to work.
Wifi does not work.
Bluetooth seems to work but have not tested it.
GTX 870m seems to be working but does not show in "about this mac" by specific name. just says nvidia gpu
native resolution work but can not change resolution
OSx seems to be smooth and working well but cant do much with no internet.

Does anyone have any easy-ish guides to getting wifi working? touchpad would be nice too but can manage with usb mouse.
 
Update. I now know the wifi is not capable so cross that off. I have an eithernet adaptor working for internet, works well. Speakers are recognized but no sound. still cant figure out touchpad. graphics seems to glitch in browser or heavy use. any help please
 
Are you using a FHD or QHD model? ive been trying to get mojave working on mine
 
ob1jakobi said:
Update. I now know the wifi is not capable so cross that off. I have an eithernet adaptor working for internet, works well. Speakers are recognized but no sound. still cant figure out touchpad. graphics seems to glitch in browser or heavy use. any help please
Click to expand...
Did you try voodoo i2c?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top