[SUCCESS] i5-6600K, Gigabyte GA-Z170-HD3, Gigabyte Radeon R9 390

[lerass]

no sound i tried the tutorial everthing works exept sound and usb 3
are you sure the sound info are correct
please send to us your config.plist file

 

[lerass]

i made it sound works i just installed voodoo hda from here and rebooted my system https://sourceforge.net/projects/voodoohda/files/?source=navbar

my motherboard is GA-Z170-HD3R SO THIS TUTORIAL WORKS FOR THIS MOBO ALSO

for usb all usb i used IOAPIC Fix
and USB Fix
from here
http://www.tonymacx86.com/el-capitan-desktop-guides/179221-skylake-starter-guide.html
now all works and thats amazing

 

[MatveyBelyy]

Audio:

1. Use the Clover DSDT patch found here, under the audio section. Then reboot.
2. Mount your EFI.
3. Run audio_CloverALC-110.command. Reboot.

View attachment error.tiff i have this error when i try to boot the sound

 

[3apa3a]

So, i managed to boot the installation. I had made some changes in config.plist and disconnected my NVIDIA. And it started.
But now i have a different problem. My disk must be guid partition table. For this i should format it or buy new one. It's sad but thank you very much, guys.

could you pls share config file?

 

[3apa3a]

Audio:

1. Use the Clover DSDT patch found here, under the audio section. Then reboot.
2. Mount your EFI.
3. Run audio_CloverALC-110.command. Reboot.

nothing happened...
i've installed voodooHDA, sound appeared but it is VERY VERY noisy. Any ideas?

 

[thedrumdoctor]

I have this board + i5-6400 running El Capitan 10.11.5 but I'm using the onboard Intel HD530 graphics (for now).

Using MultiBeast 8.2.3 here's what works (for me), using the UEFI Boot Mode:

USB - all working.
Ethernet - use Realtek RTL8111 v2.1.0d1
Audio - Should be ALC887 and there are 2 options to install. Neither option will give me a device showing up in the system. There is a thread elsewhere about disabling Sytem Integrity Protection (SIP), installing the codec, then re-enabling SIP but with mixed results. My patience is wearing thin and this build is for music primarily, so I'm going to get a USB sound card.

The HD530 onboard graphics do not wake the monitor up from sleep on the HDMI port I am testing. The rest of the computer wakes, just not the monitor. Apparently, the fix is to get Nvidia graphics card as they don't have sleep/week issues, so bye-bye on-board graphics...

 

[arisho]

I have this board + i5-6400 running El Capitan 10.11.5 but I'm using the onboard Intel HD530 graphics (for now).

Using MultiBeast 8.2.3 here's what works (for me), using the UEFI Boot Mode:

HI i got same configfuration as you and wouls like to use onboard card but if i didnt use HD530 (on multibeast) i have halo and ghosting effect mainly with chrome or when moving beetween safari tabs.If i use it it works even worst...
Did it happened to you?

 

[vitoludo]

I spent quite a bit of time on this, so I hope this benefits someone...

What's Working/Included:
- Audio
- Proper USB's/Customized SSDT-USB.dsl
- Ethernet
- GPU with full Acceleration
- Memory Recognition

What's Not Working:
I'm not sure... I think everything works. If you find something that does't work I'll fix it.

Will this guide work with this configuration?
Gigabyte GA-Z170MX-Gaming 5
i7-6700
Integrated GPU

thanks,

 

[laurajuliette]

Is the microphone working for you? Mine doesn't detect any input from the 3.5mm port, though audio does work.

 

[frigjord]

What's Working/Included:
- Proper USB's/Customized SSDT-USB.dsl

Would you mind sharing how you got USB 3.0 to work?

I've got the same board and i've tried just about everything to get it to work faster than 2.0 speeds.