- Joined
- Aug 29, 2012
- Messages
- 2
- Motherboard
- ASUS X99-E WS UDB 3.1
- CPU
- Xeon E5-2687V4
- Graphics
- GT 640
10.11.5 installer created with UniBeast 6.2.0.
Asus X99-E WS USB 3.1
Xeon E5-2687 v4
GT 640
Booting to the installer just resets after printing the '++++++' line.
I've tried adding boot flags cpus=1 and -x, replacing OsxAptioFix2Drv-64.efi with OsxAptioFix2Drv-free2000.efi, replacing VBoxHfs-64.efi with HFSPlus.efi, and adding NullCPUPowerManagement.kext
What am I missing here?
[EDIT]
Setting a fake CPUID of 0x0306E0 gets past the reset, but leaves me with AICPUPM kernel panics, even with NullPowerManagement injected
[EDIT]
Removing almost everything from DSDT and SSDT in Clover stopped the kernel panics (dropping oem and generating tables = bad, it seems...)
Now it hangs on [ PCI configuration begin ] and no solution I can find fixes it (npci=0x2000, npci=0x3000, FixDarwin).
Asus X99-E WS USB 3.1
Xeon E5-2687 v4
GT 640
Booting to the installer just resets after printing the '++++++' line.
I've tried adding boot flags cpus=1 and -x, replacing OsxAptioFix2Drv-64.efi with OsxAptioFix2Drv-free2000.efi, replacing VBoxHfs-64.efi with HFSPlus.efi, and adding NullCPUPowerManagement.kext
What am I missing here?
[EDIT]
Setting a fake CPUID of 0x0306E0 gets past the reset, but leaves me with AICPUPM kernel panics, even with NullPowerManagement injected
[EDIT]
Removing almost everything from DSDT and SSDT in Clover stopped the kernel panics (dropping oem and generating tables = bad, it seems...)
Now it hangs on [ PCI configuration begin ] and no solution I can find fixes it (npci=0x2000, npci=0x3000, FixDarwin).
Last edited: