UniBeast: Install OS X El Capitan on Any Supported Intel-based PC

[zubidoobi]

Hi all,

i just created a bootable usb with unibeast on El Capitan and trying to install el capitan on gigabyte z87mx-d3h. when i try to boot from usb it gets stuck at loading bar with mac logo. anyone has faced this or have any idea why?

 

[steveturtle]

hello, it is my config:
MB:msi B150M BAZOOKA
CPU: Intel I5-6500
Display card: nvidia GT620

After install EI Capitan in my PC, (after install via USB > reboot > Enter OSX > reboot > Cannot enter OSX)
I cannot login into OSX since the 3rd boot.
Any idea ??
I've attached my boot log
(hang at: missing bluetooth controller transport!)

 

[steveturtle]

hello, it is my config:
MB:msi B150M BAZOOKA
CPU: Intel I5-6500
Display card: nvidia GT620

After install EI Capitan in my PC, (after install via USB > reboot > Enter OSX > reboot > Cannot enter OSX)
I cannot login into OSX since the 3rd boot.
Any idea ??
I've attached my boot log
(hang at: missing bluetooth controller transport!)

OK. problem solved.
I skip the steps 6.6 - 6.15 (not to use Clover and customac)
And then I use the Multibeast to setup the bootloader
(follow this guide:
http://www.tonymacx86.com/threads/g...n-msi-z170a-gaming-m7-i7-6700k-gtx970.181299/
step [install] 9 -11)

 

[ehsdeveloper]

Remake your UniBeast USB Installation thumb drive, and select Nvidia (it will be set as true). This is the Clover equivalent to Chimera's GraphicsEnabler=Yes. You need to do this because you have an older GT 210.

Speaking of which...

Since we're not telepathic, we need to know your system components. See the tonymacx86 Forum Rules & Policies on signature block components.

Additionally, please provide complete details in your Profile.

Mobo: motherboard manufacturer/model
CPU: detailed CPU model (e.g., i7-4770K)
Graphics: Video card manufacturer/model and/or Intel Integrated Graphics version (e.g., HD4600)

See my Profile items to the left of my post, under my name.

By doing completing your Profile and signature block, you help us help you better.

I have added can you please let me know ?

 

[Stork]

I have added can you please let me know ?

Let you know what? I gave you the answer to your question in my previous post, first paragraph.

 

[ehsdeveloper]

Let you know what? I gave you the answer to your question in my previous post, first paragraph.

Yes sir, I did same and still issue there ....

 

[Wissem954]

Hello, i have a problem reaching the installer at the screen with the Apple logo it doesn't load, it stucks at 0%

EDIT: 05/27/2016

i finally solved this problem i followed those steps:
1. Run EFI Mounter v3.app to mount boot disk. Edit the Clover config.plist (/Volumes/EFI/EFI/CLOVER/config.plist) in boot disk.

<key>Devices</key>
......
<key>USB</key>
<dict>
<key>FixOwnership</key>
<true/>
<key>Inject</key>
<true/>
</dict>

2. Copy the downloaded FakeSMC.kext and USBInjectAll.kext to /Volumes/EFI/EFI/CLOVER/kexts/Other/

 

[Caseymartin707]

Hi everyone,

I have been reading a lot of these posts and can't seem to easily find someone who is having the same issue as me. I am trying to figure out why it won't give me the option to choose my SSD as an install location. It only allows me to choose the USB I am using as the bootable disc, and then when I did choose it just to see what happens, it obviously wouldn't let me.

First off, I am using these for my build:

Mobo: Gigabyte Z170m-D3H LGA1151
CPU: i7-6700k
GPU: GTX 950 Windforce
SSD: Samsung 850 EVO 250GB 2.5-Inch SATA III

Let me know if anyone needs for build specs.

I would love if anyone could explain to me what I need to do in order for it to be possible to install on my SSD. The BIOS recognizes the SSD, so it is not a problem of the motherboard recognizing it. I was originally not able to get the Apple logo to load all the way without seeing code logs pop up and the system restarting. I fixed that by adding "-x" to the boot arguments under options from the clover installer.

Now I can get to the El Capitan installer and everything works fine, until I have to choose a hard drive location. My SATA configuration is set to AHCI so that is not a problem either.

Please help a guy out! This is my first hackintosh build and I would love to get it up and running.

PS: Thanks so much Tony! If I run into any more problems I can't figure out I will ask you guys again.

 

[Caseymartin707]

EDIT (SOLVED 1ST ISSUE): I forgot to go into disk utility and reformat the SSD. Stupid mistake but in my defense I am using a TV to install since my monitor arrives tomorrow, and the top left bar wasn't visible to get to disk utility so I had to blindly click until I got it right. I will keep this post here in case anyone else finds value from it.

NEW PROBLEM: I can get the Apple logo loading bar all the way to where to where it is completely full, but then nothing happens. I have waited for as long as 10-15 minutes when the logo bar is full, and nothing happens. If I don't use "-x" under boot arguments it won't get all the way through the Apple logo loading bar either. I hope someone can offer a suggestion, thanks so much.

I have found that it is because I have a Locale 14 Error. I know what I need to insert as ktext into the plist config. but can't find out where the plist config. is from the Clover page.

 

[GiuGiu]

Hello everyone, how do I install the bootloader so you do not have the avian ssd with el capitan thanks to stick?
I tried to install pipe dream but it gives me this error (booting from the SSD stick does not give me this error): panic cpu 0 caller
But if I try to install clover when I click on install gives me an error and not me it does install.

Thank you all