Contribute
Register

[SOLVED] App Store doesn't work, but iCloud does somehow..

Status
Not open for further replies.
Joined
Jan 12, 2014
Messages
10
Motherboard
Asus P5G41-m lx
CPU
Intel Pentium E5400 2.7 GHz
Graphics
NVDIA Gts 250
Mobile Phone
  1. iOS
Hey,
after a few days my Hackintosh seems to work properly..
But I can't login to the AppStore and I can't use FaceTime and iMessage either.
And there upon I can't load unsigned kexts..

Can someone help me?
My specs are:
P5G41-m lx mainboard
Gts 250
Intel Pentium E5400
2Gb Ram
EDIMAX EW-7811UN WLAN USB adapter
 
I have turned off SIP and I put Kexts like AtherosL1cethernet into the kexts/10.11 in the EFI but that doesn't work.

And can you explain it easy to me how to fix the appstore?

To access the App Store you must first fix your Ethernet.
Ethernet should be active, set to BuiltIn and en0.

Install your Ethernet kext to /Library/Extensions for El Capitan or /System/Library/Extensions for other versions (use MultiBeast) .

The Rules said:
Profiles need to contain at least your primary system to assist others with helping you
 
Last edited:
To access the App Store you must first fix your Ethernet.
Ethernet should be active, set to BuiltIn and en0.

Install your Ethernet kext to /Library/Extensions (use MultiBeast).
Is it possible to fix the appstore and so on with wifi only?
 
ethernet MUST be active and assigned to en0. And then and only then can you access App Store etc.
There are numerous posts on how to fix this problem and fairly easy to do.
You can download DPCIManager to check if correct.
 
To access the App Store you must first fix your Ethernet.
Ethernet should be active, set to BuiltIn and en0.

Install your Ethernet kext to /Library/Extensions for El Capitan or /System/Library/Extensions for other versions (use MultiBeast) .
I've tried so many times to get these unsigned Kexts like AtherosL1cethernet.Kext to load but it still won't load.
I have tried put it to /Library/Extensions or /System/Library/Extensions and EFI/Clover/Kexts/10.11 and /Others.
I have tried too by doing this thing a described to set CrsActiveConfig to 0x3 and 0x67.
Nothing works.. Can somebody tell me in a simple way how i can load these unsigned kexts??
 
I've tried so many times to get these unsigned Kexts like AtherosL1cethernet.Kext to load but it still won't load.
I have tried put it to /Library/Extensions or /System/Library/Extensions and EFI/Clover/Kexts/10.11 and /Others.
I have tried too by doing this thing a described to set CrsActiveConfig to 0x3 and 0x67.
Nothing works.. Can somebody tell me in a simple way how i can load these unsigned kexts??

You cannot just 'put' the kexts, you must install them correctly with something like KextBeast.
Disabling SIP allows the installation of unsigned kexts.
 
You cannot just 'put' the kexts, you must install them correctly with something like KextBeast.
Disabling SIP allows the installation of unsigned kexts.
I have.. i tried it with Kext Wizard and KextBeast
 
I have.. i tried it with Kext Wizard and KextBeast

I just looked at the Asus website page for your board and downloaded the manual.
It references Realtek LAN.
Different web pages give links to download Windows drivers for both Atheros and Realtek.

Realtek.png
 
Status
Not open for further replies.
Back
Top