Post output of 'lspci -nn' in Linux Terminal.
i install the mac on my usb driver,
and see my sata driver in systeminfo see picture ,
and 'lspci' not fond on my mac os,
but i run the DarwinDumper_2.9.9 and get pci info
more info in attachment.
thanks again.
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 07)
00:04.0 Signal processing controller: Intel Corporation Device 1903 (rev 08)
00:14.0 USB controller: Intel Corporation Device 9d2f (rev 21)
00:14.2 Signal processing controller: Intel Corporation Device 9d31 (rev 21)
00:15.0 Signal processing controller: Intel Corporation Device 9d60 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Device 9d61 (rev 21)
00:15.3 Signal processing controller: Intel Corporation Device 9d63 (rev 21)
00:16.0 Communication controller: Intel Corporation Device 9d3a (rev 21)
00:17.0 SATA controller: Intel Corporation Device 9d03 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d14 (rev f1)
## 00.1c:0 is a bridge from 00 to 01-01
00:1c.5 PCI bridge: Intel Corporation Device 9d15 (rev f1)
## 00.1c:5 is a bridge from 00 to 02-02
00:1f.0 ISA bridge: Intel Corporation Device 9d48 (rev 21)
00:1f.2 Memory controller: Intel Corporation Device 9d21 (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d70 (rev 21)
00:1f.4 SMBus: Intel Corporation Device 9d23 (rev 21)
01:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
02:00.0 SD Host controller: O2 Micro, Inc. Device 8620 (rev 01)
3a:01.0 Unassigned class [ffff]: Illegal Vendor ID Device ffff (rev ff)
Summary of buses:
00: Primary host bus
1c.5 Bridge to 02-02
1c.0 Bridge to 01-01
01: Entered via 00:1c.0
02: Entered via 00:1c.5
3a: Secondary host bus (?)