[Guide] Dell Inspiron 15 7559 (Skylake, i7-6700HQ, Intel HD 530) Using Clover

[funkbass796]

If you remove HFSPlus.efi, the Clover installer will install it.

It is also probably in the Clover ISO.

So I added VboxHFS and removed the string from the config.plist, tried the USB in all of the different ports I have and still stuck at same place on boot. I'll try out an older version of clover next. Any other ideas?

 

[funkbass796]

So I added VboxHFS and removed the string from the config.plist, tried the USB in all of the different ports I have and still stuck at same place on boot. I'll try out an older version of clover next. Any other ideas?

And version 3354, which is a version that worked for the creator of the guide, is not yielding a different result

 

[RehabMan]

And version 3354, which is a version that worked for the creator of the guide, is not yielding a different result

It could be a BIOS setting/BIOS version issue. Also, you can try without any OsxAptioFix*.efi. Keep in mind OsxAptioFix2Drv-64.efi overrides OsxAptioFixDrv-64.efi in the case you have both.

Also USB guide: http://www.tonymacx86.com/threads/guide-10-11-usb-changes-and-solutions.173616/

 

[idvali]

power cord disconnected? no other USB devices connected other than the installer USB? correct BIOS settings? correct BIOS version? correct Clover options?

Please check all these variables in the guide

Could you provide which usb stick you used and efi folder for getting to the installer?

 

[seijinshu]

I have a kext that could fix your SD Card Slot. Let me test it on my 5999 first (We should share some hardware. I have skylake too).

 

[dodvip123]

I have a kext that could fix your SD Card Slot. Let me test it on my 5999 first (We should share some hardware. I have skylake too).

Good to hear, keep us up to date on the SD if it works

Could you provide which usb stick you used and efi folder for getting to the installer?

I used a 2.0 8GB USB stick to create the installer with unibeast, attached EFI folder boots the installer fine for me.

 

[qq457885471]

Excuse me, I have patched the DSDT and SSDT, but the sound doesn't work, could you provide your efi or patched folder? Thank you very much.

 

[Geek96]

I followed the guide but I have a similar problem to many users . I create the pen but when I put all of Clover options and hit send does not go forward does not move to the screen that all have :

... / Boot.efi

 

[RehabMan]

I followed the guide but I have a similar problem to many users . I create the pen but when I put all of Clover options and hit send does not go forward does not move to the screen that all have :

... / Boot.efi

Try the generic laptop guide...

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Pay attention the Skylake info in the FAQ. It is important.

 

[RehabMan]

Excuse me, I have patched the DSDT and SSDT, but the sound doesn't work, could you provide your efi or patched folder? Thank you very much.

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.