Contribute
Register

Hp Probook 4540s - Blank Screen After Apple Logo

Status
Not open for further replies.
Joined
Apr 26, 2016
Messages
3
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hello, thanks for your time taken to read this post.

The Problem:
So, when I boot my machine up into the Clover I use these boot flags: IGPlatformID=01660003 IGPEnabler=No -x
Then I start Mavericks, and the Apple logo appears then a loading wheel appears, then a progress bar appears. It gets to about 68% done, then the screen goes blank. I wait a few minutes the VoiceOver comes along and tries to help me (I can't use voiceover). So what I think is that everything is all good, except the screen is failing me. I have looked at other posts and tried using some of their bootflags, but with no success.

My PC Specs:
Intel i5 3210m
8GB RAM
Intel HD4000
AMD Radeon (Disabled in BIOS)
(Any other PC spec requests, just ask.)

====================================
Thank you all in advance, I really do appreciate you all!!
====================================
 
Hello, thanks for your time taken to read this post.

The Problem:
So, when I boot my machine up into the Clover I use these boot flags: IGPlatformID=01660003 IGPEnabler=No -x
Then I start Mavericks, and the Apple logo appears then a loading wheel appears, then a progress bar appears. It gets to about 68% done, then the screen goes blank. I wait a few minutes the VoiceOver comes along and tries to help me (I can't use voiceover). So what I think is that everything is all good, except the screen is failing me. I have looked at other posts and tried using some of their bootflags, but with no success.

My PC Specs:
Intel i5 3210m
8GB RAM
Intel HD4000
AMD Radeon (Disabled in BIOS)
(Any other PC spec requests, just ask.)

====================================
Thank you all in advance, I really do appreciate you all!!
====================================

Follow this guide. I recommend using Clover Hotpatch guide. http://www.tonymacx86.com/threads/g...book-using-clover-uefi-hotpatch-10-11.189416/
 
Wow! Thanks for the quick reply, I'll will try this!
 
Wow! Thanks for the quick reply, I'll will try this!

No problem :) Make sure to back up everything before changing over to Clover Hotpatch.
 
While it was nice of you to send me that link, I was wondering if there was a way to get the screen working, the installer is up and everything, but the screen just doesn't want to show it. When I press Esc voiceover turns on! Thanks a TON! (I am quite the
noob at hackintoshing)!
 
While it was nice of you to send me that link, I was wondering if there was a way to get the screen working, the installer is up and everything, but the screen just doesn't want to show it. When I press Esc voiceover turns on! Thanks a TON! (I am quite the
noob at hackintoshing)!

You will be able to get to the installer just fine by reading the guide.
 
You will be able to get to the installer just fine by reading the guide.
I get same problem, solution is to install ATI graphic while you create unibeast usb installer
 
I get same problem, solution is to install ATI graphic while you create unibeast usb installer

Nonsense.
AMD not supported on ProBook 4540s (it is disabled by the files in the guide).
The guide does not use Unibeast.
Your profile does not indicate you have ATI/AMD graphics.
 
I get same problem, solution is to install ATI graphic while you create unibeast usb installer

Use Intel HD 4000. AMD Graphics is not supported.
 
Status
Not open for further replies.
Back
Top