[Guide] Install 10.11 on Lenovo G580(20150) Laptop with Clover UEFI

[RehabMan]

Directly from app store as update

Make sure you followed post #1... as written...

If you need analysis...

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.


--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[mattnoir]

Make sure you followed post #1... as written...

If you need analysis...

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.


--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

Hello again,

I finally managed to install OS X based on this guide, but I can't make it boot from hard drive, so I 'm attaching all things you asked me for. Also I updated my profile.
Problem now is, I keep getting cpu power management panic and I think resolution is not working. I attached config.plist from this guide. Now I booted it from install USB clover.

 

[RehabMan]

Hello again,

I finally managed to install OS X based on this guide, but I can't make it boot from hard drive, so I 'm attaching all things you asked me for. Also I updated my profile.
Problem now is, I keep getting cpu power management panic and I think resolution is not working. I attached config.plist from this guide. Now I booted it from install USB clover.

You did not provide the files requested. Please read the request carefully.

 

[mattnoir]

Oh, sorry, I overlooked clover file...here it is

 

[RehabMan]

Oh, sorry, I overlooked clover file...here it is

Remove IOUSBFamily.kext from CLOVER/kexts/10.11 (system files have no place on EFI). And no need to patch IOUSBFamily.kext for your hardware anyway.

Your ACPI setup is incorrect. See guide: http://www.tonymacx86.com/el-capitan-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

And for power management: http://www.tonymacx86.com/el-capita...01-guide-native-power-management-laptops.html

This guide uses patched AppleHDA. You have not installed it.

 

[mattnoir]

Remove IOUSBFamily.kext from CLOVER/kexts/10.11 (system files have no place on EFI). And no need to patch IOUSBFamily.kext for your hardware anyway.

Your ACPI setup is incorrect. See guide: http://www.tonymacx86.com/el-capitan-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

And for power management: http://www.tonymacx86.com/el-capita...01-guide-native-power-management-laptops.html

This guide uses patched AppleHDA. You have not installed it.

I tried to follow the instructions step by step, but it still does not work, clover is in low resolution (the one from install USB is fine) and stops at panic by cpupowermanagement

IOUSBFamily.kext is needed in my opinion, when I removed it none of my USB devices worked

I am sure I installed AppleHDA into S/L/E (it was not there now, don't know why). Now I included it in clover kexts, but kextstat|grep -y applehda still shows nothing

I am including clover zip once again (now only kexts and ACPI) just to be sure. :/

 

[RehabMan]

IOUSBFamily.kext is needed in my opinion, when I removed it none of my USB devices worked

See guide: http://www.tonymacx86.com/el-capitan-laptop-support/173616-guide-10-11-usb-changes-solutions.html

I am sure I installed AppleHDA into S/L/E (it was not there now, don't know why). Now I included it in clover kexts, but kextstat|grep -y applehda still shows nothing

I am including clover zip once again (now only kexts and ACPI) just to be sure. :/

Make sure you install it correctly. You must use a kext installer.

 

[mattnoir]

See guide: http://www.tonymacx86.com/el-capitan-laptop-support/173616-guide-10-11-usb-changes-solutions.html



Make sure you install it correctly. You must use a kext installer.

I'll look at the USB thing, but for now I'd like at least boot from disk (and my USB works with iousbfamily so at least something)

I tried kext wizard and now it finally works:
kextstat|grep -y applehda
107 0 0xffffff7f82663000 0x18000 0x18000 com.apple.driver.AppleHDAController (2.6.1f2) 61C6E65E-2E09-386C-92B9-34D95E889A52 <106 66 11 7 6 5 4 3 1>

but still no sound whatsoever

 

[RehabMan]

I'll look at the USB thing, but for now I'd like at least boot from disk (and my USB works with iousbfamily so at least something)

I tried kext wizard and now it finally works:
kextstat|grep -y applehda
107 0 0xffffff7f82663000 0x18000 0x18000 com.apple.driver.AppleHDAController (2.6.1f2) 61C6E65E-2E09-386C-92B9-34D95E889A52 <106 66 11 7 6 5 4 3 1>

but still no sound whatsoever

If you need help, you will need to provide files...

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

 

[mattnoir]

If you need help, you will need to provide files...

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

Here. I am sure I attached everything correctly this time.
Also one thing - when I tried command kextstat|grep -y applehda this time, again nothing showed up. But when I executed it first time it worked and there was no reboot of machine in between and kext is still present in S/L/E.