UniBeast: Install OS X El Capitan on Any Supported Intel-based PC

[Stork]

Hi Tony,

At step 2.14 I can't select El Capitan or Yosemite. I can hoover above them, but cannot click them. Do you have a clue what I am doing wrong.

Thanks in advance!

Looks like you have a bad download of El Capitan. Download it from the Apple Mac App Store again. Be sure to trash your old version of El Capitan before downloading it again.

See http://www.tonymacx86.com/unibeast/174272-unibeast-6-troubleshooting-notes.html for more information.

 

[tommy222]

Hi guy´s

I have a problemt with of instalation The Capitan, all is well until select the Boot Mac OS X front USB and the screen I see the white apple and progresse of bar no run, I have a Nvidia Quadro K2000 and I entre extre arg flag nv_disable=1 and no run.

Please any people can help me.

Thanks.

Fuente 850W Quiet Computing ATX 1
Placa Gigabyte GA-X79 UP4 1
INTEL Core i7 4820K 3,7Ghz / 3,9Ghz - 4 Núcleos - 10MB Caché 1
Nvidia Quadro K2000 2GB 1
CRUCIAL M500 SSD 240GB SATA III

 

[IsaSys]

Hi. My graphics card is a r9 280x , the installation process works for this ?​

 

[clintster]

Hi guy´s

I have a problemt with of instalation The Capitan, all is well until select the Boot Mac OS X front USB and the screen I see the white apple and progresse of bar no run, I have a Nvidia Quadro K2000 and I entre extre arg flag nv_disable=1 and no run.

Please any people can help me.

Thanks.

Fuente 850W Quiet Computing ATX 1
Placa Gigabyte GA-X79 UP4 1
INTEL Core i7 4820K 3,7Ghz / 3,9Ghz - 4 Núcleos - 10MB Caché 1
Nvidia Quadro K2000 2GB 1
CRUCIAL M500 SSD 240GB SATA III

connect your monitor to your mother board input and try to boot to installer that way. Once you get El Cap installed and running, you can download the appropriate driver and switch back to your video card.

 

[tommy222]

Thanks Clintster, but It doesn't work

I proof new installation without any graphics configuration in burn UniBeast and nothing.



It is stop here.

You have any idea more?

I run verbose mode


and verbose safe mode



and give me tow error´s

Thanks again for you help.

 

[idnawsi]

Thanks Clintster, but It doesn't work

I proof new installation without any graphics configuration in burn UniBeast and nothing.

View attachment 184918

It is stop here.

You have any idea more?

I run verbose mode

View attachment 185122View attachment 185123
and verbose safe mode

View attachment 185124

and give me tow error´s

Thanks again for you help.

i am having the same problem with you, i cant boot it on my asus ROG GL552VX, intel based, gtx950m, 12GB of ram, intel hd 530

but when i booted it on my other laptop,, it was bootable, can someone help me to fix it,... I am new on hackintosh,,

 

[Jotronic]

Stupid question, but this has not been pointed out. Once the second boot is complete, from the USB partition but to the hard drive option, where is the Multi-beast part of this setup done? Meaning, do I just run it from within the USB drive or do I drag it onto the desktop and run it from the hard drive? It's these little details that are driving me nuts.

 

[P1LGRIM]

Stupid question, but this has not been pointed out. Once the second boot is complete, from the USB partition but to the hard drive option, where is the Multi-beast part of this setup done? Meaning, do I just run it from within the USB drive or do I drag it onto the desktop and run it from the hard drive? It's these little details that are driving me nuts.

It doesn't matter but most people would copy it to the hard drive for any future use.

 

[Jotronic]

It doesn't matter but most people would copy it to the hard drive for any future use.

Thank you. It is the small stuff like this that makes a difference.

 

[wilhar0046]

I am currently using a ASUS Z170-A LGA 1151 Intel Z170 MOBO and Intel i7-6700K processor. I am having an issue when I try and boot from the USB that I created using UniBeast. I was able to create the USB drive just fine and had no issues until I attempted to boot from it. I am using the normal version of Clover not legacy and wanting to install El Capitan. I get to Clover and it gives me the option to log into the OS X installer. When I select that without changing any boot flags It shows an apple for a few seconds and then creates the progress bar and stalls. After a moment I realize there isnt any power going to the USB buss anymore. I found a post about needing a NullCPEPowerManagement.kext for some Gigabyte mobo but I am using an ASUS and didnt know. For now I am currently using the ASUS Z170-A on-board video card until I can afford NVIDA 980TI. I believe its Intel HD Graphics. I even selected that option in the UniBeast builder. Any help would be appreciated.