Contribute
Register

[Guide] Booting the OS X installer on LAPTOPS with Clover

just another question.
i know intel n1030 wifi combo is not supported and does not work but my bluetooth is working. and i can use internet through internet tethering.
how is it possible that bt works and wifi doesnt

Bluetooth is a different device (with different driver software) than WiFi.
 
I had to re install os x again.
finishing the installation, i installed clover boot loader to my HDD.
althouh I have also replaced config and dsdt, it does not bootup from hdd , but when installation usb is inserted, it boots up
what is my solution?
can i use chamelion boot loade except clover?
 

Attachments

  • image.jpg
    image.jpg
    582.6 KB · Views: 74
I had to re install os x again.
finishing the installation, i installed clover boot loader to my HDD.
althouh I have also replaced config and dsdt, it does not bootup from hdd , but when installation usb is inserted, it boots up
what is my solution?
can i use chamelion boot loade except clover?

"Waiting for DSMOS" without a corresponding "DSMOS has arrived" implies that FakeSMC is missing or not loading.
 
i copied kext files in the directory again and it is solved.thank you

may i use Hackintosh vietnam tool to create boot loader and patch ssdt and dsdt?

the cpu fan sound is annoying. i tried to fix it through patching ssdt and dsdt but i was un successfu
 
I installed Yosemite successfully with Unibeast. But when I tried to use Clover bootloader, I stuck at

OsxAptioFixDr: Starting overriding for System\Library\CoreServices\boot.efi
Using reloc block:yes, hibernate wake: no
++++++++++++++++++++++++++++++++++++

I followed closely the guide in thread #1. Can you help please?

HP Probook 6550b
Intel i5 M450
4GB Ram
 
I installed Yosemite successfully with Unibeast. But when I tried to use Clover bootloader, I stuck at

OsxAptioFixDr: Starting overriding for System\Library\CoreServices\boot.efi
Using reloc block:yes, hibernate wake: no
++++++++++++++++++++++++++++++++++++

I followed closely the guide in thread #1. Can you help please?

HP Probook 6550b
Intel i5 M450
4GB Ram

The guide in post #1 does not use Unibeast.

Boot verbose, show photo. Post EFI/Clover folder as ZIP (omit 'themes' folder).
 
I boot verbose and all I see is those 3 lines below:

OsxAptioFixDr: Starting overriding for System\Library\CoreServices\boot.efi
Using reloc block:yes, hibernate wake: no
++++++++++++++++++++++++++++++++++++

 

Attachments

  • CLOVER.zip
    3.4 MB · Views: 68
I boot verbose and all I see is those 3 lines below:

OsxAptioFixDr: Starting overriding for System\Library\CoreServices\boot.efi
Using reloc block:yes, hibernate wake: no
++++++++++++++++++++++++++++++++++++


Your config.plist is not appropriate for your hardware. It is only for mixed HD3000 on 7-series. Your laptop is neither HD3000, nor 7-series.

And you don't need GenericUSBXHCI.kext (it seems unlikely your laptop has USB3, most laptops that old don't have it).

Make sure you follow the guide in post #1 (it does not use Unibeast). You must use the BaseBinaries method as that is the only way you can remove the Intel graphics kexts.

Your issue is likely a USB problem. Try all USB ports. Make sure you're using a USB2 port and USB2 stick.

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
I successfully install Yosemite with Unibeast and Multibeast. But I want to reinstall with Clover UEFI. What config.plst should I choose?
 
Back
Top