[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

[doeriol2016]

Rehab... here my screenshots... what do you mean ?

Thank YOU

 

[RehabMan]

Rehab... here my screenshots... what do you mean ?

Thank YOU

The platform id you show in the fist pic is wrong. Must be 0xa260006 (or 0x0a260006), not 0a260006. It simply isn't the same number without the 0x prefix.

You should start over... follow the guide exactly as written:http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

 

[doeriol2016]

The platform id you show in the fist pic is wrong. Must be 0xa260006 (or 0x0a260006), not 0a260006. It simply isn't the same number without the 0x prefix.

You should start over... follow the guide exactly as written:http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

i will test it now, but i never change this....

 

[doeriol2016]

The same again, i´ve changed the Platform ID to 0X0A260006 and the Fake ID to 0X04128086.
Apple Logo starts and at 2/3 of boot the System Restarts... and now ?
I follow your Guide 100% ... create the Install-Stick four times... the same Error.

 

[mr_romyee]

Good news! Thanks for all the right suggestions. Finally, got full QE/CI. Managed to test out the current setup with a digital monitor. No more freezing up at power management unsupported.... Got through the normal bootup sequence & voila Login screen with QE/CI fully working. Moreover, System Report shows Intel HD Graphics 4400 1536 MB with the right graphics kexts loaded. BTW using a VGA monitor with HDMI->VGA active adapter. So that part of the puzzle also got solved. Anyhow, appreciate all the help. Hope to payback someday.

Hi Rehabman

Alas! It seems I spoke too early. No full QE/CI yet. It's almost there but there are some issues. As it stands now, whenever I drag app windows they seem to leave residual copies of themselves and the top edges break off at times. Any suggestions?

 

[RehabMan]

Hi Rehabman

Alas! It seems I spoke too early. No full QE/CI yet. It's almost there but there are some issues. As it stands now, whenever I drag app windows they seem to leave residual copies of themselves and the top edges break off at times. Any suggestions?

Read post #1, "Problem Reporting".

 

[doeriol2016]

hey Rehab what now ? What can i do ?

 

[RehabMan]

The same again, i´ve changed the Platform ID to 0X0A260006 and the Fake ID to 0X04128086.
Apple Logo starts and at 2/3 of boot the System Restarts... and now ?
I follow your Guide 100% ... create the Install-Stick four times... the same Error.

Boot verbose, show photo. Post EFI/Clover folder as ZIP (omit 'themes' folder).

 

[doeriol2016]

Ok EFI folder are in post today.
Boot -v pictures with changed Platform ID upload in the next 10 Minutes

 

[doeriol2016]

Ok EFI folder are in post today.
Boot -v pictures with changed Platform ID upload in the next 10 Minutes

-v Boot the Same Picture as in the last Post