Contribute
Register

Good news for x99 10.11 [Haswell E - El Capitan]

Status
Not open for further replies.
Disable in the BIOS speed step. I have the same processor, but I have my Mavericks system. But speed step is working fine. Geekbench 25000
 
A really great thread, thanks to all the contributors I have installed EL Capitan on a build I have just completed.

Gigabyte x99 soc champion
Intel 5820k
16gb kingston Hyper 2666
Plextor 125gb M.2
Custom Water loop in a SMa8

Most things appear to work, will find out more in the coming days, will probably need your help,:thumbup:

As there are a few Geek Bench scores, i had a go, drove the cpu up to 4.7Ghz @1.36 volts LLC High
to get 28138 temps topped out 60 degrees. Now its back to 4.2Ghz @ 1.14volts so we can check out the normal things.

All the help greatly appreciated :headbang:

GB-4.6-28138 .jpg

CBR-4.6-1343.jpg
 
Last edited:
Hey,
Did you do something special to get this speed steps ?
Thanks

Impressive score & temp btw

Just followed the guide here, Intel Power is not reporting power draw!!! correctly though, its around 300watts +- 40watts out the wall socket.

Just got hold of a pair of 780Ti's with water blocks to play with, that will really suck some power.

btw. I did have LLC load line Calibration set to high as against auto.
 
@BoomR.....

Did you just add the test2.efi as suggested by Woodhams?
Here are the drivers you should load into your /EFI/ClOVER/drivers64UEFI boot drive.
• Test2.efi
• OsxAptioFixDrv-64.efi
• EmuVariableUefi-64.efi
• HFSPlus.efi
• OsxFatBinaryDrv-64.efi
• FSInject-64.efi

Or did you use another OsxAptio fix?

Hey there - apologies for the delay. Somehow I missed your reply.

You are correct - all I did was add the test2.efi to the collection of stuff that was already installed by Clover. Oh, and of course swapping out HFSPlus.efi for the VBox or whatever it is/was.
 
First of all i want to thank all of you for encouraging me to install El Capitan on mine hackintosh.

I will open thread about mine instilling process but first of all i need some help to make it perfect.

Components:
Motherboard: Gigabyte X99-UD7 WiFi
Processor: Intel i7 5820k
Processor Cooler: CM Hyper 212Evo
PSU: Thermaltake 730w Smart Modular
Graphics: Vapor-X R9 280x
RAM: 2x8GB Kingstone HyperX Furry Black
Case: Thermaltake S71 Full Tower
HDDs: WD 2TB, 2xWD 1TB, WD 500GB and some more but i don't have SSDs
Sound Card: Motu Ultralite MK3

I use hackintosh primary for audio production in Logic Pro.

I followed posts of members: lokicat ; nmano ; moviemakergr ; kduverney ; malki

I used Lokicat's directions and kext's, config.plist and ssdt.aml files.

Installed fine with other boot flags and overcloking is working, only my temperatures was not so great for my taste so i leaved cosmetics of 4.3GHz and set clock to fabric 3.3Ghz. In overcloked mode idle was about 45C-49C but on Load 75C-82C. Without temps are idle 32C-35C and load 52C-59C.

So far only problem that i have is USB ports. They work but strangely. I have external HDD 3.5" in case that is usb3.0 and it is only working in usb2.0. Mine sound card is usb2.0 and it is working in usb2.0. Problem is that i have random power loss(i think that is) and it results like removed external HDD and reseted USB audio. Sometimes usb port stop working and reenable itself.

And motherboard WiFi isn't working.

Here's some pictures and thanks in advance!


hello,
amm i don't use ENG that much so what i see you have success install os 10.11+ on your system

i have
i7-5930k
16GB DDR4
GTX 770 2GB
ASUS X99-M

what ever the most important is how do install os 10.11+ with 5930k and x99


already used
FakeCPUID 0x0306E4
also
AppleIntelCPUPowerManagementInfo.kext

still on this logo
mac-prohibit-symbol-screen-icon.png


Sorry for my basic ENG language.
Any help here.


:::::::::::::: update ::::::::::::::::


after using
lokicat method

boot from usb with ((nv_disable=1))

after chose usb installer i get black screen
 
i just get tired from 10.11.3

i use now 10.10.5 and usb installer works fine

but system now boot only with
( npci=0x2000 -x )

what should i do to boot normally with 5930k in 10.10.5
 
i just get tired from 10.11.3

i use now 10.10.5 and usb installer works fine

but system now boot only with
( npci=0x2000 -x )

what should i do to boot normally with 5930k in 10.10.5

Hi almusaka,

You have a config close to mine (asus x99-a/usb3.1, i7 5930k, GTX 960, 4X4 DDR4 2133Mhz), and I always had this "forbidden" logo.. For me, it was the USB port, even if it can boot on many ones, the installation was unable to continue the process.. I saw I have only 2 USB2 ports which work for the installation of 10.11.3, on the asus x99-a, it's the second ports from the top.

I also use the fakesmc from slice (I attach the file if need)

Best,
 

Attachments

  • FakeSMC.kext.zip
    43.1 KB · Views: 115
ALL SLOTS WORKED WITH LEGACY

Open disk utility Erase with
Master Boot Record-(scheme)
OSX Extended(Journaled)-(Fomat)

Install clover
Install boot0af in MBR
CloverEFI 64 bits SATA
Used this for x99 BIOS booting for all slots are worked.
I upload EFI files.Edit config and install kexts install SSDT what ever you need.
This method worked gigabyte x99.

BIOS setting
XHCI enabled

UEFI mode
CSM SUPPORT
Enable or disables UEFI CSM to support a legacy PC boot process.
if disable CSM only worked certain slots.
 

Attachments

  • Screen Shot 2016-02-27 at 6.52.14 PM.png
    Screen Shot 2016-02-27 at 6.52.14 PM.png
    211.8 KB · Views: 174
  • Screen Shot 2016-02-27 at 6.46.42 PM.png
    Screen Shot 2016-02-27 at 6.46.42 PM.png
    218.6 KB · Views: 192
  • Screen Shot 2016-02-27 at 6.45.04 PM.png
    Screen Shot 2016-02-27 at 6.45.04 PM.png
    211.4 KB · Views: 195
  • Screen Shot 2016-02-27 at 6.44.22 PM.png
    Screen Shot 2016-02-27 at 6.44.22 PM.png
    206.7 KB · Views: 208
  • Screen Shot 2016-02-27 at 6.34.22 PM.png
    Screen Shot 2016-02-27 at 6.34.22 PM.png
    193.2 KB · Views: 185
  • Screen Shot 2016-02-27 at 6.58.05 PM.png
    Screen Shot 2016-02-27 at 6.58.05 PM.png
    179.4 KB · Views: 175
  • Screen Shot 2016-02-27 at 7.15.36 PM.png
    Screen Shot 2016-02-27 at 7.15.36 PM.png
    89.4 KB · Views: 215
  • config kexts ssdt.zip
    7.2 MB · Views: 133
Status
Not open for further replies.
Back
Top