No Audio After Sleep/Wake - AppleHDA Realtek Audio [Fixes]

[croatoa]

Hi all. Please, help me to configure audio issue after sleep.
Motherboard Gigabyte GA-Z97-D3H, Core i5 4460.
I've installed OSX 10.11.1, system recognize as Mac Pro (Early 2008). I did everything according to instructions (UniBeats, MultiBeats).

 

[toleda]

Hi all. Please, help me to configure audio issue after sleep.

See Post #1

 

[loginfailed]

Thanks for this thread, Toleda.

10.11.2
GA-Z97X-UD3H
Clover boot loader

Used quoted fix posted by Tigersoul925. (excluded darwake info) Install .kext and restart. Done.

• 1150 only: Fix no sound after sleep on 1150
  1. credit: tigersoul925

 

[supergab]

it seems to be working ... Thank you.

 

[cp643]

Hi guys... i'm use MacPro 3,1 but the sound(ALC887) not working after sleep, but if i use iMac 14,1 audio it's ok after sleep... Help me please
My motherboard is ASUS P8H61 MLE...

 

[maaxk]

I was able to get audio to work, but upon wake there is no detection for the audio jacks. Either the back audio jack or the front headphone jack will work, but only whichever was plugged in before the computer awoke from sleep. I tried the fixes on the front of the page, but I either didn't do them correctly or they didn't work. Any ideas what the problem could be?

 

[pier25]

Just install this kext using KextWizard or any kext installer and see if the problem is fixed. This is what I did.
Your motherboar has the same Realtek ALC892 as mine.

https://bitbucket.org/RehabMan/os-x...wnloads/RehabMan-CodecCommander-2015-1122.zip

Thanks that did it for me!

10.11.3 on GA-Z87M-D3H with ALC892

 

[Wilky13]

Will the CodecCommander.kext I used in Yosemite (10.10) work in El Capitan (10.11)? Or do I need a newer build of the kext?

 

[osirhc]

As far as I remember I tried recipes from 2 to 5 as well as simple Reset HDA Clover option.
All of them work in the sense that I get sound after sleep.
But the sound becomes distorted after 15-20 seconds of playback.
If I play continuously then I hear periodic snaps that spoil the music.
As I understand the sound amplifier looses and gains power voltage periodically...
Now I use vanilla AppleHDA with "OS X/Clover Patched AppleHDA Realtek ALC Audio"

When I used OsX 10.10.4 the problem was solved by selecting right SMBIOS option.
I used iMac 14.2 instead of 15.1 and the problem disappeared.
But after upgrading to 10.10.05 and then 10.11 returned again.

Just wanted to post in case someone finds themselves in a situation like mine. I have an ASRock Z97 Anniversary mobo Realtek887 audio codec - changing my profile to iMac 14,2 from MacPro3,1 fixed my lack of audio after sleep/wake. I suppose time will tell if it sticks but so far so good.

 

[ninety-six]

Anyone have any success with ALC887? I have Multibeast 8.0 and Clover bootloader with El Capitan 10.11.2.