- Joined
- Oct 13, 2015
- Messages
- 2
- Mac
- Classic Mac
- Mobile Phone
Disclaimer: I have no idea as to what I'm doing.
I installed everything according to the Clover guide for 10.11, and everything was working fine. This was a fresh install as I had just completed the build, and this was go at trying to things to work. Actually thought I had done something wrong, or had failed to do something, because everything went so smoothly.
Everything worked except bluetooth and after a bit of looking around I got inpatient and I was trying everything. I came across RehabMan's posts and tried following along, and this is where things took a turn for the worse. As I said, I really don't have much of a clue as to what I am doing so I was reading his README-Mac and came across this part:
My guess, "boot-args" was not empty before. I remember that terminal had returned something, but I am not quite sure what. I copied the string into terminal:
And now I'm dead in the water. Won't boot no matter what. Just in this perpetual cycle of restarting. I unplugged the drive that I had installed to and was just going to install fresh to another drive, and that didn't work. I started fresh with a new creation of the USB boot drive, and that didn't work. I tried resetting to optimized defaults, and that didn't work.
At this point, I don't care about bluetooth. It would have been nice but I'll settle without it. I just want to completely start fresh as though I had never done anything in the first place. I'm assuming there is something that I am missing in regards to resetting my motherboard settings but I cannot find it.
Motherboard: gigabyte z97x-ud5h-bk
What do I need to do to just start fresh?
Thanks
I installed everything according to the Clover guide for 10.11, and everything was working fine. This was a fresh install as I had just completed the build, and this was go at trying to things to work. Actually thought I had done something wrong, or had failed to do something, because everything went so smoothly.
Everything worked except bluetooth and after a bit of looking around I got inpatient and I was trying everything. I came across RehabMan's posts and tried following along, and this is where things took a turn for the worse. As I said, I really don't have much of a clue as to what I am doing so I was reading his README-Mac and came across this part:
Retrieve the current system boot arguments:
Append "kext-dev-mode=1" to the boot-args:If for example boot-args was empty before:
My guess, "boot-args" was not empty before. I remember that terminal had returned something, but I am not quite sure what. I copied the string into terminal:
sudo nvram boot-args="kext-dev-mode=1"
And now I'm dead in the water. Won't boot no matter what. Just in this perpetual cycle of restarting. I unplugged the drive that I had installed to and was just going to install fresh to another drive, and that didn't work. I started fresh with a new creation of the USB boot drive, and that didn't work. I tried resetting to optimized defaults, and that didn't work.
At this point, I don't care about bluetooth. It would have been nice but I'll settle without it. I just want to completely start fresh as though I had never done anything in the first place. I'm assuming there is something that I am missing in regards to resetting my motherboard settings but I cannot find it.
Motherboard: gigabyte z97x-ud5h-bk
What do I need to do to just start fresh?
Thanks