Contribute
Register

X58 and OS X El Capitan? (X58A-UD3r)

Status
Not open for further replies.
The Inatek KT4006 (FL1100) i mentioned earlier does in fact work OOB in El Capitan and will operate at USB 3.0 speeds.
 
Do you remember your steps for installing it.
 
OK retested the X58A-UD3R with the following observations/results:

1. Format the USB Master Boot Record not GUID or boot0af error
2. Clover Legacy Boot Mode must be used
3. USB 2.0 port must be used- try different ones
4. Standard Legacy Boot Mode UniBeast ACPI fixes: FixHPET FixDTGP
5. Additional ACPI fixes: FixDarwin FixIPIC AddMCHC FixUSB

After these changes, it booted to OS X El Capitan USB installer! Thanks to everyone who's posted results here so far.

Here is the config.plist: :thumbup:

Finally got my GA X58A UD7 REV 2.0 I7 booting from the Clover USB with the above settings! Thanks TonyMac! Will try the complete install when I get a spare HD.
 
Have you gotten your USB 3.0 ports to work? Also, for some reason, my Bluetooth no longer works. I have the native Bluetooth adapter/Wi-Fi (using the PCI-e card hack). Shutdown does not work either. The computer turns back on again after couple of seconds. Did you face these issues?

I am using the same DSDT.aml file that I had for Yosemite.

Hi im Using this kext to enable audio. I hope it help you.

This KEXTS
View attachment Archive.zip
 
Got 889 Audio working on my GA-X58-UD7 using the audio_cloverALC-110_v1.0f.command terminal file.

I used the following options.
Confirm Clover Legacy Install (y/n): Y
Confirm Realtek ALC889 (y/n): Y
Clover Audio ID Injection (y/n): N

When I selected 'Y' for Clover Audio ID Injection I could not get audio to work.

Pleased to report that everything appears to be running on my system now... including iMessage! :D

I Have the audio working with this kext. View attachment Archive.zip. May only problem is the USB 3.0 not recognized

i hope it help you with the audio.

Thanks in advance!
 
Status
Not open for further replies.
Back
Top