Gigabyte ga-z77x-ud3h / i5-3570k / HD4000 works except for Via sound

[fulton]

Hello,


yes the pendrive was created with Unibeast from this site. I started the booting process for example with -v bootflag. The process started normaly, and then writing to the screen: MAC Framework successfully initialized..., and Got boot device..., it looks like everything is ok, but the process stop at this lines.

 

[joncas]

yes the pendrive was created with Unibeast from this site. I started the booting process for example with -v bootflag. The process started normaly, and then writing to the screen: MAC Framework successfully initialized..., and Got boot device..., it looks like everything is ok, but the process stop at this lines.

You could try putting the pen drive in one of the two usb 2.0 slots on the back panel, those which are in the same connector as the ethernet plug.
Otherwise my guess is that something is not right in your bios settings -- could you try to compare again with the screenshots in the first post?

 

[fulton]

Yes, I try it all of the USB-ports. I look the BIOS screenshot again.

 

[mesaroom]

Did any one upgraded to Yosemite OS X 10.10.4 (14E46) recently?

Did any one got sound fixed? I am trying all but I cannot have sound working at all.

I have Gigabyte ga-z77x-ud3h / core i7 3770K / HD4000, everything worked out except the sound.

I tried VoodooHDA v2.7.2 for VT2021 and works but the volume is extremely low, i changed the format to 96khz 48khz but nothing is helping me to get descent sound.

I know many of us are using that mother board and it would be great if some one can help US to fix this Audio problem.

 

[JorgeMDQ]

Did any one upgraded to Yosemite OS X 10.10.4 (14E46) recently?

Did any one got sound fixed? I am trying all but I cannot have sound working at all.

I have Gigabyte ga-z77x-ud3h / core i7 3770K / HD4000, everything worked out except the sound.

I tried VoodooHDA v2.7.2 for VT2021 and works but the volume is extremely low, i changed the format to 96khz 48khz but nothing is helping me to get descent sound.

I know many of us are using that mother board and it would be great if some one can help US to fix this Audio problem.

I run the same Gigabyte model and I upgraded recently but had no problem at all. I´m running yet VoodooHdaDettingsLoader.app but if you need some help write me, ok?

 

[eric3616191]

HI,I have a Gigabyte ga-z77x-ud3h / core i5 3570K / HD4000, because too many people have this motherboard, BIOS version I now F20E, I use CLOVER 10.10.3 currently installed various drivers and can not find config.plist, can offer to me? Thanks.

 

[eric3616191]

hi, I have a Gigabyte ga-z77x-ud3h / core i5 3570K / HD4000, because too many people have this motherboard, BIOS version I now F20E, I use CLOVER 10.10.3 currently installed various drivers and can not find config.plist , you can give me? Thanks.

 

[joncas]

[QUOTE = joncas; 423790]
hi, I have a Gigabyte ga-z77x-ud3h / core i5 3570K / HD4000, because too many people have this motherboard, BIOS version I now F20E, I use CLOVER 10.10.3 currently installed various drivers and can not find config.plist , you can give me? Thanks.

Hi,

Enclosed is the config I use on that board ...

 

[eric3616191]

Hi, Enclosed is the config I use on that board ...

Hi,Thanks, I have to ask where the GA-Z77X-UD3H, CPU I5 3570K driver gave me, thank you!

 

[joncas]

Hi,Thanks, I have to ask where the GA-Z77X-UD3H, CPU I5 3570K driver gave me, thank you!

I don't understand what you mean by CPU driver - normally it doesn't need any driver: the operating system kernel takes care of it.