[Guide] Acer Aspire S3-951 using Clover

[jfi1988]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I updated my signature and my basic information. So I hope this information is helpful. What I can say is, that I made a bootable chimera stick with multibeast. When I boot from this stick, I can choose if I want to boot my windows or my yosemite install stick. When I start yosemite install in verbose mode, it freezes on the following line:

 

[RehabMan]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I updated my signature and my basic information. So I hope this information is helpful. What I can say is, that I made a bootable chimera stick with multibeast. When I boot from this stick, I can choose if I want to boot my windows or my yosemite install stick. When I start yosemite install in verbose mode, it freezes on the following line: View attachment 122058

Your profile/signature is not detailed enough. Please read post #10 carefully and provide all six (6) details requested.

As for the cause of the KP in the image you attached, read here: http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html

 

[jfi1988]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I added all details. Hopefully they will help you

 

[RehabMan]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I added all details. Hopefully they will help you

Read post #12 for the fix for your current issue...

 

[jfi1988]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I will give it a try when I will be back at home in the evening or tomorrow. Thanks for your help

 

[jfi1988]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I tried some things yesterday. I tried your tut for the powermanagement. That didn't fix the problem. So I tried creating a bootstick with clover. With the clover stick I was able to boot into macOS installation, but it stucks on a gray screen with a rotating mouse. I used this guide to create the stick and changed the dsdt and ssdt from the one that is provided in this thread.

 

[RehabMan]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

I tried some things yesterday. I tried your tut for the powermanagement. That didn't fix the problem. So I tried creating a bootstick with clover. With the clover stick I was able to boot into macOS installation, but it stucks on a gray screen with a rotating mouse. I used this guide to create the stick and changed the dsdt and ssdt from the one that is provided in this thread.

Desktop guides generally don't work on laptops...

http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

 

[ziryab]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

Hi,

I am new on this forum, can you help me to run a dual boot (YOSEMITE AND WINDOWS 8.1) on my Acer Aspire S3-392 .

Regards.

 

[RehabMan]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

Hi,

I am new on this forum, can you help me to run a dual boot (YOSEMITE AND WINDOWS 8.1) on my Acer Aspire S3-392 .

Regards.

No idea without hardware details...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

 

[davedavebea]

[GUIDE] Acer Aspire S3-951 YOSEMITE Fully Fonctionnal

No video sorry

Here is the new AppleHDA (mic ok)

Thanks for your guide!!!
but...
sound isn't working for me...
anyone with my issue?