Wont Restart after Installation completes

So here is my new build

Yosemite 10.10.3
Intel i7 290k
Msi z97 Gaming 5
Kingston 16GB Kit (2x8GB)1866MHz
480 GB SSD


I have follow the Tonysbuild Guide here

http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html


Using the configuration of tloc623's Guide here:

http://www.tonymacx86.com/user-builds/158358-success-msi-z97-gaming-5-i5-4690k-clover.html


I am using Clover v2 r2973 (as I've heard the most recent release has issues with booting) which is the exact release in the guides. Using a 16 Gb USB 3.0 to install. Trying to install 10.10.3.


I get through the process of booting past the clover boot selector, format SSD, go to install (it takes 6 minutes) but it never restarts or shuts down like the guide suggests. I shut the machine down myself and continue the process, making a recovery partition, but I am unable to boot into the installed SSD and it does not show up in the Clover menu.


Below are the logs for 'Errors only' and 'All logs'.

It will take more time at the end. ~20-30 Mins.

I have been trying this for around 3 days now, and tried multiple configurations and wait times and It says 6 minutes, but I usually leave it for 20 Min. Just under an hour the other day

AjaxLeVallee said:

I have been trying this for around 3 days now, and tried multiple configurations and wait times and It says 6 minutes, but I usually leave it for 20 Min. Just under an hour the other day

Click to expand...

Call me old fashion or quirky but at this stage, I wouldn't use a USB 3.0 Drive plugged into a 3.0 port for the installation, these drives and ports at installation are more prone to corrupted or missed data. Play safe and use a 2.0 USB Drive plugged into a 2.0 port for the initial installation - Good Luck.

Thank you for the replies guys I will give it a go and update!

AjaxLeVallee said:

Thank you for the replies guys I will give it a go and update!

Click to expand...

Please remember in the 2nd stage of the installation, it may say about a minute left but it can actually take another 30 minutes to complete the installation and then reboot, just leave it and let it do its thing - Good Luck.

Tried the 2.0 drive couldn't hack it, just kept getting stuck in EFI Shell.

Tried Uni-Beast still a no go. Formatted SSD Mac OS X (Journaled), went into Yosemite Installation, recieved Cannot install Essentials.Pkg. Tried booting with - no-zp still received same error.

Will download Yosemite and remake Uni-Beast installer