New install of Yosemite and can not get past step 5

I have just built this Hackintosh with:
GIGABYTE GA-Z97X-UD5H
i7-4790K
32 GB RAM Ballistix DDR3L 1600CL8
GeForce GTX 980 Graphics Card
2 Samsung SSD 850 EVO 120GB
1 Seagate 1 TB HDD
I can install all the steps after looking and seeing your post I got to the language step it ran good until the reboot and then it hangs up on step 5 I made a new bootable USB with Multibeast and Yosemite and reinstalled it again just to make sure I did not miss any steps. But still get hung up at reboot window and choosing my Yosemite SSD. Can some one tell me if I missed a boot flag? or ?
Any help would be appreciated for this neewbee

westmc45 said:

I have just built this Hackintosh with:
GIGABYTE GA-Z97X-UD5H
i7-4790K
32 GB RAM Ballistix DDR3L 1600CL8
GeForce GTX 980 Graphics Card
2 Samsung SSD 850 EVO 120GB
1 Seagate 1 TB HDD
I can install all the steps after looking and seeing your post I got to the language step it ran good until the reboot and then it hangs up on step 5 I made a new bootable USB with Multibeast and Yosemite and reinstalled it again just to make sure I did not miss any steps. But still get hung up at reboot window and choosing my Yosemite SSD. Can some one tell me if I missed a boot flag? or ?
Any help would be appreciated for this neewbee

Click to expand...

Boot with flag -v and post a photo of the frozen screen.

I have tried the -v flag and this is what I got

westmc45 said:

View attachment 132078

I have tried the -v flag and this is what I got

Click to expand...

Boot with "nv_disable=1 -f -v"

ok this worked and I got to the Install Succeeded screen then I reboot like it was written ,but got to the
apple screen it hangs up there again. I read somewhere I may have to modify a boot load file but not sure what to do.

I just tried this line of code nv_disable=1 -f -v and got to the pink screen to enter password i got to Yosemite. Is there some line of code I can modify so I do not have to keep writing this in the boot loader that will just take me to the password login screen right away?

westmc45 said:

I just tried this line of code nv_disable=1 -f -v and got to the pink screen to enter password i got to Yosemite. Is there some line of code I can modify so I do not have to keep writing this in the boot loader that will just take me to the password login screen right away?

Click to expand...

First install Multibeast with proper options selected.

Then install NVIDIA Web Driver for your OS X version

Then add the flag "nvda_drv=1" under <key>Kernel Flag</key> of your org.chameleon.boot.plist file.

Jithin.C.V said:

First install Multibeast with proper options selected.

Then install NVIDIA Web Driver for your OS X version

Then add the flag "nvda_drv=1" under <key>Kernel Flag</key> of your org.chameleon.boot.plist file.

Click to expand...

Now I have this problem I take out the USB and get this screen can not even get back to password screen I tried all the boot flags from before and no luck. This all happened after I install multi beast and followed the Tony Mac selections for unibeast install. I have disconnected the other SSD and the HDD.

westmc45 said:

Now I have this problem I take out the USB and get this screen can not even get back to password screen I tried all the boot flags from before and no luck. This all happened after I install multi beast and followed the Tony Mac selections for unibeast install. I have disconnected the other SSD and the HDD.

Click to expand...

What are the options you had selected on Multibeast installer??

Have you installed the NVIDIA Web Drivers??

Try booting with "kext-dev-mode=1 nv_disable=1 GraphicsEnabler=No IGPEnabler=No -f"

New install of Yosemite

OK here is what I did> I completely started from step one and made a new USB as shown in the Installation guide. I took my two SSD and re-partioned them so everything is wiped clean. I followed all the steps and now am at the screen with Yosemite showing. I have internet connection. I was told to install video drivers but don't know how to install them since its all windows based? I have noticed that my problems with restart happen after I install the mulit-beast application. I have gone on the website for the Gigabyte mother board and looked at the specifications to see what I need to check during mulitbeast. So do Install my graphics drivers now and then mulitbeast?