Contribute
Register

Dual monitor not working on Yosemite 10.10.2

Status
Not open for further replies.
violanted

violanted

Joined
Jul 29, 2014
Messages
135
Motherboard
Gigabyte GA-Z170X-Soc Force
CPU
i5-6600K
Graphics
RX 560
Mac
  1. Mac Pro
Mobile Phone
  1. iOS
Hi all,

My Specs:

Gigabyte GA-Z77-DS3H Intel LGA1155 ATX
Intel Core i5-3570K 3.4GHz LGA 1155
Nvidia GeForce GTX660 ti 2048 MB
CORSAIR Vengeance LP White DDR 3 8 GB (2x4 GB) 1600 Mhz CML8GX3M2A

I have the above Hackintosh and want to use to monitors. One is already connected all working fine I have attached another DVI cable ( The Graphic Card has two DVI and two HDMI connection ) to another monitor. To be as detailed as possible the second monitor only has VGS DB-9 connection so I used an adapter on the card from DVI to VGA.

There is no input signal and the displays option on settings do not show the mirroring options even though is selected.

Any ideas what I need to do here to have two monitor working?
 
Same problem after upgrade to 10.10.2. My dual monitor was working before the update...
 
Jithin.C.V said:
Connect Monitors to DVI/HDMI ports. VGA is not supported on Yosemite.
Click to expand...



Good morning Jithin.CV , is there any way to contact you, such as skype?

Added you as a friend and try to send a private message but I can not .

I have the same problem with monitors .

Greetings .
 
diegobrondo424 said:
Good morning Jithin.CV , is there any way to contact you, such as skype?

Added you as a friend and try to send a private message but I can not .

I have the same problem with monitors .

Greetings .
Click to expand...

What is the problem??

Share you issues here... If it is related with installation i can try to help you with my limited knowledge.


See forum rules too, :D

Rules said:
Members may not solicit nor provide assistance via private communications. This forum was created to provide help by posting questions and getting answers. By not publicly discussing you are depriving others of solutions to problems they may encounter.
Click to expand...
 
Jithin's Gaming Build
Z390 UD |  i7 9700K |  RX 580 Pulse 8GB
Jithin's Development Build
GA-Z170X-Gaming 3 |  i7 6700 |  RX 580 Pulse 8GB
Jithin.C.V said:
What is the problem??

Share you issues here... If it is related with installation i can try to help you with my limited knowledge.
Click to expand...

Install Yosemite 10.10.2 using Multibeast EasyBeast .

Then connect my Nvidia GTX960 and install Web Driver - 343.02.02f02 . Everything works correctly ( with the main monitor LG 23 inch DVI)

The problem is when I connect my second monitor ( LG 17 inch VGA ) with a DVI-D.

At times working properly ( the two monitors together) but to restart my mac returns the error. :|

Starts the bootloader and load when the apple logo both monitors are turned off and not start OSX.

When unplugging the VGA monitor everything works normally.
 
diegobrondo424 said:
Install Yosemite 10.10.2 using Multibeast EasyBeast .

Then connect my Nvidia GTX960 and install Web Driver - 343.02.02f02 . Everything works correctly ( with the main monitor LG 23 inch DVI)

The problem is when I connect my second monitor ( LG 17 inch VGA ) with a DVI-D.

At times working properly ( the two monitors together) but to restart my mac returns the error. :|

Starts the bootloader and load when the apple logo both monitors are turned off and not start OSX.

When unplugging the VGA monitor everything works normally.
Click to expand...

VGA not supported on Yosemite. However some members reported that they can work with VGA. Better you use DVI or HDMI or DP for the second monitor too.
 
Jithin's Gaming Build
Z390 UD |  i7 9700K |  RX 580 Pulse 8GB
Jithin's Development Build
GA-Z170X-Gaming 3 |  i7 6700 |  RX 580 Pulse 8GB
Perfect! Probe with another HDMI monitor and it works perfectly. Now the last query, I have another error, sometimes when I disconnect a USB device pc freezes. Because it can be?
 
violanted said:
Hi all,

My Specs:

Gigabyte GA-Z77-DS3H Intel LGA1155 ATX
Intel Core i5-3570K 3.4GHz LGA 1155
Nvidia GeForce GTX660 ti 2048 MB
CORSAIR Vengeance LP White DDR 3 8 GB (2x4 GB) 1600 Mhz CML8GX3M2A

I have the above Hackintosh and want to use to monitors. One is already connected all working fine I have attached another DVI cable ( The Graphic Card has two DVI and two HDMI connection ) to another monitor. To be as detailed as possible the second monitor only has VGS DB-9 connection so I used an adapter on the card from DVI to VGA.

There is no input signal and the displays option on settings do not show the mirroring options even though is selected.

Any ideas what I need to do here to have two monitor working?
Click to expand...

Get a dsiplay with DVI or HDMI inputs. You might also try with an active DVI2VGA adapter. Not all adapters for connecting VGA D-SUB dosplays to DVI will work.
 
Going Bald said:
Get a dsiplay with DVI or HDMI inputs. You might also try with an active DVI2VGA adapter. Not all adapters for connecting VGA D-SUB dosplays to DVI will work.
Click to expand...


Thank you very much . Probe with an HDMI monitor and functioning properly.

Regarding the VGA monitor with DVI adapter I will be doubt because sometimes Yosemite recognized and sometimes not. But issue solved.


Another topic .


With the theme of frozen when I remove the USB . What could be the problem?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top