- Joined
- May 4, 2014
- Messages
- 133
- Motherboard
- GA-B85-HD3
- CPU
- i3-4330
- Graphics
- HD4600
- Mac
- Mobile Phone
Hi,
I am currently running the following setup:
Mavericks
Gigabyte GA-B85M-HD3 -LGA1150
Intel Core i3-4330
Transcend 4GB (1x4GB) DDR 1600 MHz
Samsung EVO 120GB (SSD)
Gigabyte GZ-X1 Black Chasis
Corsair VS650 Series 650W ATX PSU
And have purchased a new SSD to do a clean install on the same machine running mavericks.
I have kept all the bios settings the same and but after booting from the usb (as per the yosemite guide) i getting the errors as per the attached pics.
I have created the USB on my existing Hackintosh using multi beast 7.0.1 and unibeast 5.0.1.
I have looked at the guide again and it suggests that I should disable the VT-D, CFG-Loack and Secure boot mode. I have look at my Bios and i cannot see any of these settings.
Please could you assist.
I am currently running the following setup:
Mavericks
Gigabyte GA-B85M-HD3 -LGA1150
Intel Core i3-4330
Transcend 4GB (1x4GB) DDR 1600 MHz
Samsung EVO 120GB (SSD)
Gigabyte GZ-X1 Black Chasis
Corsair VS650 Series 650W ATX PSU
And have purchased a new SSD to do a clean install on the same machine running mavericks.
I have kept all the bios settings the same and but after booting from the usb (as per the yosemite guide) i getting the errors as per the attached pics.
I have created the USB on my existing Hackintosh using multi beast 7.0.1 and unibeast 5.0.1.
I have looked at the guide again and it suggests that I should disable the VT-D, CFG-Loack and Secure boot mode. I have look at my Bios and i cannot see any of these settings.
Please could you assist.