Contribute
Register

How do I get Sata3 VIA PCIe with full 6GBs speeds?

Status
Not open for further replies.
curse said:
So i have purchased a eSATA 6G PCIe 2.0 Controller Card but it still shows up as unknown. I know it uses the Marvel 88SE9128 chipset. It works but only at half speeds. Anyone have any luck getting these to work at full speeds? or have a SataIII solution??!

thanks!
Click to expand...
There is no support for SATA 3 at this time.
 
OctoTUF
TUF Z390-PRO GAMING |  i9 9900K |  Vega 64 8GB
KabyLake
GA-Z270X-Ultra Gaming |  i7 7700K |  HD 630
Kaby-Test
ROG STRIX Z270I GAMING |  i7 7700K |  HD 630
at all? the card claims it works with real mac pros, wouldn't it work then? I've read people getting it to work with the sandybridge procs
 
Noble-Hac
GA-EX58-UD5 |  i7 970 |  GeForce GTX 780
Hi Macman, just quick question, since sata iii is not supported is it advisable to use sata ii connection for a sata iii hdd? or it doesn't make any difference?

Thanks
 
margelino said:
Hi Macman, just quick question, since sata iii is not supported is it advisable to use sata ii connection for a sata iii hdd? or it doesn't make any difference?

Thanks
Click to expand...
All SATA 3 drives and controllers will run at SATA II speeds until there is support.
 
OctoTUF
TUF Z390-PRO GAMING |  i9 9900K |  Vega 64 8GB
KabyLake
GA-Z270X-Ultra Gaming |  i7 7700K |  HD 630
Kaby-Test
ROG STRIX Z270I GAMING |  i7 7700K |  HD 630
:eek:

I ran a test today thinking I had SATA3 capability. I moved a 1.7 GB file from my SSD (start up drive) to the following drives in my system.

1:05 min. - Western Digital Caviar Green 1TB SATA 3.0Gb/s
45 sec. - Western Digital Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s
1:57 min - Buffalo 250GB external 250GB HD USB 2.0
Is it just better architecture that would make the difference on the 2 WD internal drives?

THX! great help!
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top