First off, I would like to thank everyone who has contributed to the various guides and information on this forum. Due to their determination and willingness to share their time as well as knowledge, what could have been a very daunting task was made super easy. I speak, of course, about installing OS X 10.6 on my desktop. My specs are. GIGABYTE GA-P35-DS3L http://www.amazon.com/gp/product/B000U8YO2W?ie=UTF8 INTEL CORE 2 QUAD Q9300 2.5 GHZ http://www.amazon.com/gp/product/B00116VHMC?ie=UTF8 ASUS NVIDIA 9800GTX 512mb http://www.amazon.com/gp/product/B0018SCSQW?ie=UTF8 6GB 1066MHZ DDR2 SDRAM http://www.amazon.com/gp/product/B001W2M3IC?ie=UTF8 D-LINK DWA-130 USB WIFI http://www.amazon.com/gp/product/B000QDBOCY?ie=UTF8 The install method I used was iBoot+Multibeast. It worked out great. I had to run multibeast a few times to get all the kext I needed(new to this so I went one issue at a time). Sound working with Voodoohda. Video working fully with NVEnabler. Ethernet working with R100SL. I was going to find an old router and set up a wireless bridge, But then I found a D-Link DWA-130 usb dongle that I used with windows. After a little bit of research and some tinkering, it is fully functional. It is using a realtek driver for a belkin usb dongle that I found on some obscure website. DLink claims it is not supported in OS X, But if it has the Realtek chipset it will work. Sleep is working with SleepEnabler.kext. Thank you everyone. I was able to get all the information I needed by just reading. And a special thanks to Tony for all his hard work. I definitely will be donating some money to the cause. If anyone needs any of the file I have let me know.