fixing boot0 done. boot1: error. && || black screen error

[schlussminute]

After three days of trial and error i decided to ask you guys for specific help, to get Mavericks running.

Specs :

• GA-P55-UD3 F9
• Core i7-860
• MSI Nvidia GeForce 9400GT
• Kingston 120GB SSD // 3 Partitions // using part1 for OSX
• 8GB GSkill Rip Jaws DDR3 1333Mhz

I started with the good old iBoot + Snow Leopard Retail DVD Guide.

1. booted iBoot
2. Installed Snow Leopard
3. ran 10.6.8 Update - MultiBeast - Reboot
4. downloaded Mavericks from AppStore and Apple Software Installer Update
5. created UniBeast (Took quite a while to find out that system lang must be english and also that i needed the installer update.)

Trying to boot the UniBeast Installer i was getting various kinds of the black screen error.
Took me almost one Day, but in the End fixed it by:

1. Installing latest Chimeira on to the OSX Partition
2. using GraphicsEnabler=Yes IGPEnabler=No PCIRootUID=1

Installed Mavericks, rebooted and ended up with the boot0:error

• According to official Guide
• i boot UniBeast USB again and from there boot Mavericks Partition
• But when i try to boot Mavericks Partition i start getting the black screen error. At this point the Flags i used before do not seem to work. Dead End!?

I sill have the iBoot CD - so tried

1. booting iBoot
2. booting SL Installation
3. From there unmounted Mavericks Partition
4. copied boot1h from UniBeast USB Stick to Mavericks Partition
5. mounted the Mavericks Partition.
6. rebooted into boot0:done boot1:error

So i see two roads...

1. fix the black screen error when trying to boot the Mavericks Parition.
2. fix the boot1:error

What would you do?

Thank you very much.

 

[dachness]

While it isn't the exact error I got. It may be worth giving it a shot:

http://www.tonymacx86.com/mavericks-desktop-support/135237-osx-mavericks-cant-boot-hd.html

Daniel