ga-z77x-up5-th

Before I start, i'll like to say attached are the file needed to get your card working and this is my way of giving back to the institution and the people that has helped me a lot (i say " thank you"). 1. Open Kext Utility App in the folder and drag IO80211Family.kext in the Kext Utility App...

As above main build being High Sierra ("HS") 10.13.6 fully working off Samsung 970 EVO on HFS+j. Utilising Corsiar 128 Gb SSD using APFS for test build. Used guide for USB install. Install was much easier than HS but my config.plist is, I believe, in a much better state than the various...

:Dz77x-up5th/BIOS 12/ OSX 10.11 Intel Core i7-3770K Ivy Bridge 1155 Dell U2413 Display I year ago I flashed the BIOS on my GA-Z77X-UP5-TH motherboard with the latest BIOS from Gigabyte (F12 BIOS) the update went OK and I got a better boot GUI, but since then I could never get the motherboard...

HEY FAM! I cannot get my USB 3.0 ports to work. Nothing will mount. My MBOX does not work. The hub on my monitor will not connect to it. They do power all of the above devices, just no connectivity. USB 2.0 works fine. I installed using Clover. I am not going to lie i tried to open it up to...

[Success] GA-Z77X-UP5-TH -i7 3770k NVIDIA GeForce GTX 660 El Capitan, 1TB RAID SSD Vanilla Install using Ozmosis Aminorjourney's updated Customac Pro 2012 Build: Core i7-3770k - GA-Z77X-UP5-TH - 32GB RAM - GTX 660 2GB - BDXL - 1TB RAID 0, 23 TB (Other Disks) - Yosemite 10.10.2, Ozmosis, Vanilla...

Got a problem with this set up. Have i7 3770k with GA-Z77X-UP5-TH and Radeon r9 280x. This setup has been working flawless for the most part as a dual boot Windows 8 and Yosemite hackintosh on same solid state drive. Ran into a problem recently unsure if auto update was on or what with Yosemite...

I am posting this as a guide to my clean Yosemite install using clover as well as to get some feedback/suggestions on a few issues that I will mention. I never upgraded to Mavericks after my Mountain Lion install (no reason just content with what I had), so with the new OS and much refined...

Hey everybody! I just changed my mainboard, but didn´t do a fresh install. i only deleted the kexts not needed anymore and installed the ones for the UP5-TH. Everything is working fine except for erthernet. I installed AppleIntelE1000e.kext from Multibeast. When i shut down the pc now and boot...

Ok first off I know this card works with Mountain Lion. I had this build up and running with 10.8.3 already but had to downgrade. I CANNOT USE MOUNTAIN LION BECAUSE OF FAULTY AVID 003 DRIVERS!!!!! The Build: GA-Z77X-UP5TH i7 3770k 3.9 GHz (overclocked) 32 GB Ram GeForce 9800GT (for...

[SUCCESS] Gerty: i5-3570K | GA-Z77X-UP5-TH | GTX 660 Ti | Mountain Lion 10.8.3 Gerty: i5-3570K | GA-Z77X-UP5-TH | GTX 660 Ti | Mountain Lion 10.8.3 Components Intel Core i5-3570K Processor - Amazon || Newegg Gigabyte GA-Z77X-UP5-TH - Amazon || Newegg Corsair Vengeance LP 16GB (2 x 8GB)...

Black and Silver PowerMac G5 Components Intel i7-3770K Gigabyte Z77X-UP5-TH &nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&AID=10446076&PID=4902415&SID="EVGA GeForce GTX-660 TI Samsung 256GB 840 Pro SSD Corsair HX850 Corsair 16GB RAM Already Owned Apple Magic...

Light's Recording Station #1 GA-Z77X-UP5-TH - i7 3770K - 32 GB - 256 SSD - GT 640 ThermalTake Xaser V Case Components TP-LINK TL-WDN4800 Dual Band Wireless N900 PCI Express Adapter, 2.4GHz 450Mbps/5GHz 450Mbps, IEEE 802.1a/b/g/n, WEP/WPA/WPA2...

[HELP] Installation problems with Gigabyte GA-Z77X-UP5-TH The system will only run in safe mode after running MultiBeast with ALC898 and hnak's AppleIntelE1000e Ethernet settings. When I boot the system with (-v) flag, I get the following screenshot and the system hangs after. Notice that the...

Hi all, I'm fairly new to the Hackintosh community- studying and saving for a few years, I just now completed my first build with very little problems. I chose to do a G5 case mod, utilizing my father, a machinist, to help with some of the cutting, etc. First, my specs: • i7-3770k-...

Hello hackintosh world! I spent over an hour on a post already before accidentally losing it...let's see if I can get the gist of it here again. I am very much a noob when it comes to the building of computers, and especially with putting together a hackintosh. I am currently using a Mac...

Hello Everyone! As the title suggests I have never done anything like this before. This will be my first build. I've decided to just go ahead and follow the CustoMac 2012 Pro build to make the process as smooth as possible. But before I do I have a few questions: The GA-Z77X-UP5-TH, seems...

Hello i am sort of new to the hackintosh world and this is the first one that i plan to build. From all of research these parts appear to be mostly compatible but i would like an opinion from a smart person that is why i am asking on here. Graphics Card:Gigabyte GeForce GTX 670 Upgraded CPU...

Hey Guys!! Got Myself a ga-z77x-up5-th i7 3770k 2x8gb ram Geforce GTX660Ti TL-WDN4800 120gb Sandisk SSD 1TB Barracuda Did the install no problem, then did multibeats, copied the Multibeast here http://www.tonymacx86.com/attachments/27977d1345552256-mb-z77x-up5-th.png.html I think I messed...

Papageientaucher's Build: GA-Z77X-UP5-TH - i7 3770K - GTX 670 - ML10.8.3 Papageientaucher's Build: GA-Z77X-UP5-TH - Core-i7-3770K - 16GB RAM - GeForce GTX-670 - Mavericks 10.9.4 Update: I recently updated to 10.9.4 (10.8.4 before). Everything is running smooth, only issue is that there...

[SOLVED] Cannot reach OS X Installer, "Still waiting for root device." Built my first machine using the guidelines on this site, but I've hit my first glitch and need the help of the community. Here's my hardware configuration: Processor: Intel IvyBridge Core i7-3770K Motherboard...