final cut pro x

My computer suddenly restarts due to kernel panic every time I try to write/share video in Final Cut Pro and iMovie. Any ideas? I saw this post: https://www.tonymacx86.com/threads/help-please-kernel-panic-in-fcpx.258629/ but I'm not sure if it applies to me or how to change my filesystem...

I plan on getting the Sapphire RX 580 Pulse 8GB for 4K editing on Final Cut Pro, with the Intel Core i5-8600K and OC to save $$$. I was wondering if I'm better off with the higher powered GPU and the non-HT i5, or if I should just got for i7-8700 minimum? Wasn't sure if Final Cut Pro would...

For the purposes of this post, here are my current settings: GPU (Vega 56) and IGPU (Intel HD 630) are enabled in BIOS PCIE (Vega 56) is primary display (connected to monitor) Inject Intel disabled in Clover (prevents use of IGPU in Final Cut Pro X) Lilu and Whatevergreen kexts installed...

Just after thinking that my new hackintosh is all set for daily use, I ran into some serious problems. let me start with my hardware first. i7 8700k w/ Noctua L9i Gigabyte B360N wifi v1.0 Corsair Vengeance 8gb DDR4 Crucial M.2 SATA 256gb SSD ASUS Strix RX 470 4GB Corsair 430 PSU Running...

I am in the early planning stages of building a powerful workstation that would be used mainly for VJing (Resolume Arena 6), editing (FCPx, After Effects) and possibly 3D real-time renders in TouchDesigner. Based on the July 18 Buying Guides, I am leaning towards a configuration like this...

Hi there! I'm thinking on upgrading graphic adapters. Since I use Final Cut it seems like AMD is the way to go now, but I'm wondering if a setup with dual cards will perform better. I've been looking at the ITX versions of the Sapphire 570 Pulse 4Gb, since I use a rack case and my space is...

Hi, I have a hackintosh High Sierra 12.13.4 x99 based: Gigabyte Ex Designare Broadwell 6850k asus strix RX 480 nvme samsung 256gb 960pro When I want to render a video on h264, in premiere, da vinci or FCPX, it does not start. (FCPX and DaVinci say error or failed, Premiere crashes and slows...

Hi all, I have been really satisfied with my build, a 8-core XEON 2665 2.4ghz with 16GB ram and SSD, including a Sapphire Radeon 7870 2GB graphics card, except for one thing. My 2013 Macbook Pro (15," quad-core 2.3ghz i7, 750ti 2GB) handily outperforms it in Final Cut Pro X and other tasks. So...

So I bought a XFX AMD Radeon RX 580 8GB from Best Buy. https://www.bestbuy.com/site/xfx-amd-radeon-rx-580-8gb-gddr5-pci-express-3-0-graphics-card-black/6092641.p?skuId=6092641 I did a clean install of High Sierra, I got FCP X downloaded from the Store and when I try to import, make a new...

Can anyone tell me if the R9 280X is still the recommended card for video editing in Final Cut Pro X? If so, can someone please send me a link of exactly what brand/version they would recommend? I will be editing mainly 4K video and have concerns that there isn't a 6gb version. Is the 3gb...

I am interested in building a hackintosh to save money on my next workstation. I have noticed that AMD cards are not listed on the buyers guide even though nvidia GTX cards are not as suitable for FCPX in specific. Are there any major hurtles in making an AMD card work? Also, I want my render...

In order to help users who plan on using Final Cut Pro X (FCP) to edit video, this is a benchmark that has been designed to test your GPU and because FCP is Open CL based it should preference AMD cards over Nvidia. So here are the instructions: Step 1 Download the XML file Step 2 Open...

I have a problem with my hackintosh when I leave it standing unattended for a short while (10-15minutes). If I come back to my machine it is a bit stuttery and takes about 30 seconds until it runs smoothly. I have "computer sleep" switched to never and my screen display turns off after 30...

Hi guys! I´m planning to build a new Hackintosh workstation for use with logic pro x and premiere/Final cut pro x. Been building a couple of pc´s a few years ago, but a lot has changed since then and i feel like a noob when it comes to specs now. ESPECIALLY when it comes to GPU´s... So i...

Since I've Add a second identical NVIDIA GPU to my system I also change my SmBIOS ➧ MacPro 6.1 + AGDPFix The H264 files playback is really jerky I remove the seconde GPU and don't touch the SmBIOS, everything back to normal Any clues, suggestions ? Thanks in advance

Hello guys. I updated to Sierra 10.12.4 and get some issue with the Color Finale plugin in FCPX. Instead to show the video preview all I have is this black screen. I've been updating OSX since El Capitan and this is the first time some problem happened. Can you help me? Thanks!

After years with problems on MacPro 3.1, MacBook pro on i7!!!!! Finally, some days ago, I decided to try to make Hacintosh ((( (I love my Mac Pro tower... I like how it looks like on my desktop, I like to show my clients original Mac Pro server ))) And it was difficult decision... It will be...

Hello, I'm running on yosemite 10.10.5 with an i7 5960X a GTX 980 Ti and I have very low results with Final Cut Pro X export. Seems that OpenCL is not active on my graphic card. Can someone help me ?

So I am currently working on a major film. During the first editing session, my 4790K-GTX970 hackintosh restarts randomly while in Final Cut Pro X and the third time it crashed, my project was lost. I'm wondering if this is a glitch in Final Cut Pro X or a power issue I have never had this issue...

Hello I mainly Use two softwares with are technically opposites Final cut Pro wich is OpenCl and Use GPU where the monitor is plugged Resolve wich is CUDA and best Use A GPU with no monitor pluged-in My Rig : CPU i7 à 4 Ghz RAM 24 Go @ 2800 Mhz Mobo Asus Z170-Pro GPUs Intel HD 530 & GTX 780Ti...