I've recently converted my Mac Pro 2009 to a PC, the goal was to make it as clean as possible.
The cable extended from the rear is for HDMI output, since I'm not using a discrete graphic card.
I recorded the whole conversion process in 4K, I hope this helps.
There will be a total of 4...
I alreaday have this case: https://www.newegg.com/p/N82E16811353145?Item=N82E16811353145
I want to use it for a tonymac build, but I have two questions about it:
1. I notice the product description says ATX Mid Tower. Can I use any ATX mobo from the buyers guide or do I need a specific one...
I've noticed that in the buyer's guide a lot of the recommended cases for ATX motherboard builds are Corsair Carbide cases.
However, most of those cases have been discontinued and are increasingly harder to find.
What should a builder do to find a case that will fit an ATX motherboard for their...
Does anyone have experience building with the Apevia X-Infinity mid tower case? I’m guessing it’s fine for building a Custo Mac Pro, but I don’t wanna take any chances. This is my first build. Link below. Thanks.
https://www.amazon.com/dp/B01NA0IX9F/?tag=tonymacx86com-20
I'm replacing my recently deceased 2012 Core i7-3770k build. I have all of the components picked out for a high-end i7-8700k build on an ASUS Z370-G motherboard.
However, I'm not having much luck finding a case I like, so I'm looking for suggestions. I listed a Corsair and an In Win case...
Hi there, I'm just about to pull the trigger on my first build - a nice CustoMac Pro. Brief specs:
ASUS ROG STRIX Z370-F GAMING
EVGA GeForce GTX 1070 SC GAMING 8GB
Intel i7-8700K
Ballistix Sport LT 32GB RAM
Samsung 960 EVO M.2 NVMe PCI-E 500GB
Corsair H60 CPU Cooler
I'm looking for a funky...
Thus far the only rackmount I'm finding is a Chenbro Rackmount 4U Server Chassis RM42200-1. Any other sexier options?
Innards thus far:
ASUS ROG Maximus X Hero (Wi-Fi AC) LGA1151 DDR4 DP HDMI M.2 Z370 ATX Motherboard with onboard 802.11ac WiFi, Gigabit LAN and USB 3.1 for 8th Generation Intel...
Hellow everyone. Im new to mac-Hackintosh and i have seen many videow that thanks to YOU ALL (Hackintosh instructions, tutorials, step-by-step how to guides) have made it sucsess to build hackintosh machines.
Some of the components i have seen that work (cpu, Motherboard) but i dont know about...
Hello,
Current October 2017 case recommendations is for Corsair Carbide 300R, but it looks more like budged case :)
Is any other possibilities/recommendations for
Gigabyte GA-Z270X-UD5
Core i7-7700K
EVGA GeForce GTX 1060 6GB SSC configuration to more good looking pro case and also quiet, of...
Hello everyone,
I have recently buy a Mac G5 and I plan to use the case for build an hackintosh. But now I wonder myself if it's more easy to use a Mac Pro 1.1 case, cause the power supply seems more standar form factor. (and Mac Pro 1.1 have already more slot for connector on the back and...
Howdy! I have caught the custom build fever. I'm new to both tonymac86.com & custom building, though I worked at a mac repair shop for a year
replacing and upgrading Mac parts.
I edit video on FCPX as a small side job on my 2012 13" MBP 2.9GHz and my Intel HD Graphics 4000 1536 MB GPU
is...
The most difficult part in building a hacintosh for me is choosing a good case.
Motherboards and cpu's have there specs and are rather easy to choose from.
A good casing must be silent, provide enough room for the graphic cards, fans and cooling systems.
My next project will have one of these...
Hello, I was just wondering how much of an impact a case has on audio interference. I have a really cheap case, super thin metal, and I'm getting a fair amount of interference when recording guitar, etc. I was wondering if a new case would be likely to help with this? I have a Power Mac G5 in...
I'm looking to build my first ever Hackintosh now that my 2010 iMac is getting a little warm when under load in the summer and has already had one GPU replacement (likely mixture of quality and heat issues). As the machine will be in the lounge room noise is a factor. As I live in Brisbane...
I really like the mac pro case inside and out. But wish it had more airflow on the top and bottom. My goal is to create a case, with mac pro quality (and a little smaller), but combine the designs of the mac pro, and the enthoo mAtx evolve. Here is what i got so far, I would like design...
Hey Guys,
first time post so please excuse me when I do something wrong.
I am about to built a hackintosh and I would like to buy Tonys customMac mATX. There is a list for this custom built and there is tonys list of all parts in general. My question is, with this custom mATX built there is a...
I have an old Apple 2009 Macbook Pro. I like this machine a lot, and have upgraded the hard drive and ram, replaced the battery, and switched out the dvd drive for another hard drive. The only thing that can't be upgraded is the CPU, so it's still rockin' the Intel Core 2 Duo processor. Thing is...
I've noticed that a lot of neat cases, particularly those from Bitfenix, only have one 5.25" drive bay. If I used one of those cases, I'd want to be able to have two optical drives, but that would be impossible without some sort of bracket to hold two optical drives.
Does anyone know of a...
Lian Li is synonymous with high quality fit and finish, brushed AL and also high prices. They primarily make ATX and mini-ITX cases so I was surprised to see this all Aluminum mATX case for sale at Newegg with a 20% off code.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811112482
It...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.