Please help me install Snow Leopard

Help needed installing Snow Leopard[Almost_done]

Motherboard
Manufacturer ASUSTeK COMPUTER INC.
Product Name P8H61-M LX R2.0
Version Rev x.0x
BIOS
Vendor American Megatrends Inc.
BIOS Version 0501
BIOS Release Date 06/27/2012
BIOS ROM Size 8192 KBytes
CPU
Socket Designation LGA1155
Manufacturer Intel
Version Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz
Supported Voltage 1.0 v
External Clock 103 MHz
Max Speed 3800 MHz
Current Speed 3316 MHz
Memory
8GB DDR3 RAM
Socket Designation ChannelA-DIMM0
Current Speed 1333 MHz
Memory Type DDR3
Installed Size 4096 MBytes
Socket Designation ChannelB-DIMM0
Current Speed 1333 MHz
Memory Type DDR3
Installed Size 4096 Mbytes
Graphics
AMD Radeon HD 7700 Series 1GB GDDR5

32bit PC, Can i install hackintosh with these specifications?? can u please guide me to download the dsdt, it seems that my motherboard is not listed anywhere... how do i burn the os to dual layer dvd and bootable usb drive using windows??

You BUY the install DVD, just like you have to buy windows.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

Then follow http://tonymacx86.blogspot.com/2010/04/iboot-multibeast-install-mac-os-x-on.html to install OS X 10.6.3.

With your hardware, you could use EasyBeast selection in MultiBeast and just run SL if you want.

how to i set up the bios of my mother board... ther's no setting please help! asus p8h61-mlx r2.0

steveebenezerpaul said:

how to i set up the bios of my mother board... ther's no setting please help! asus p8h61-mlx r2.0

Click to expand...

In BIOS hit F7 to get advanced mode. At Main menu hit F5 for optimized defaults.
Leave AITweaker alone for right now - only used for overclocking.
Under Advanced tab set
PCH congifuration-> High precision timer = should be default set enabled

SATA configuration = set to AHCI mode

System Agent configuration:
Primary display = PEG

USB configuration:
EHCI Handoff = Enabled

Serial port configuration - Disable if you have no need for it
Parallel port config - same as serial port

Boot Menu tab
I usually turn off the full screen logo so I can see the boot POST process.
set your boot priority options
set your os x drive first in list under Hard Drive BBS Priorities

Save&Exit

Thanks for the boot menu support it worked! But after i press f5 after the iboot loads and i put my sl dvd the sl down't show up! it shows 2 harddisks like icons... i even tried typing PCIRootUID=1 before hitting enter and it asks for iboot disk again.. How do i get sl to show up...
I got one more question if u dont mind.. is my 32bit pc compatible for yosemite??

steveebenezerpaul said:

Thanks for the boot menu support it worked! But after i press f5 after the iboot loads and i put my sl dvd the sl down't show up! it shows 2 harddisks like icons... i even tried typing PCIRootUID=1 before hitting enter and it asks for iboot disk again.. How do i get sl to show up...

Click to expand...

Disconnect all drives but the one on which you are installing SL.
Boot with iBoot.
At the Chimera screen, eject iBoot and replace with SL DVD
Wait for drive to spin up and spin down and the drive light to go out
Hit F5 to refresh.
You should see only the SL DVD icon
Hit enter

steveebenezerpaul said:

I got one more question if u dont mind.. is my 32bit pc compatible for yosemite??

Click to expand...

32bit?? What is 32 bit? Your system is capable of running 64 bit.

It has only 1 hard disk, i dono wat to do ...

steveebenezerpaul said:

It has only 1 hard disk, i dono wat to do ...

Click to expand...

This hard drive has Windows on it? Do you have a Windows install DVD? Do you want to keep your Windows working? Have you backed up all of your documents, pictures, videos, etc.? Do you have any 3rd party software loaded in Windows? Do you have install media for all 3rd party software?

In order to install OS X and Windows on the same HDD, you must first Format the drive, which will wipe out your Windows and all data on the drive.

I strongly suggest you get another drive on which to install OS X. Do not use your Windows drive.

i've already backed up everything to my external hardisk, i dont want windows anymore. i have the windows install dvd... i actually patched my windows with "patch pae" to use full 8gb ram because only 3.2 gb was usable before patch, coz windows 32bit os supports only 4gb ram... should i unpatch it and format???

steveebenezerpaul said:

i've already backed up everything to my external hardisk, i dont want windows anymore. i have the windows install dvd... i actually patched my windows with "patch pae" to use full 8gb ram because only 3.2 gb was usable before patch, coz windows 32bit os supports only 4gb ram... should i unpatch it and format???

Click to expand...

Windows is 32 bit and has nothing to do with OS X. If you are blowing away the Windows, just follow the guide I linked in the 2nd post. Format your hard drive and set you BIOS as I showed you and install SL.
With your board and CPu you will need to make sure you select EasyBeast when you run MultiBeast after you install SL.