I have done that it is now booting, i have updated and downloades mavericks but unibeast is not working and at the end after selecting mavericks in the tick box and press continue type my password in nd then it says failed
what should i do next? Should i run multibeast for snow leopard? And if so what should i install?
george/
First off need to know some stuff.
Haswell hardware is not compatible w Snow Leopard, So what we do is to load OSX SL then Download the 10.6.8 COMBO update it then download the Mavericks file !
We do not use the Apple Software Update service as this is made to work on REAL MACS not hacks.
So we don't use that service. Infact if you get SL running turn that off.
Now We do not use MULTIBEAST for SNOW LEO on this hardware either.
You will use the iBOOT HASWELL CD for SNOW LEO for all boot up processes. You will need to use the Onboard video as Going Bald has stated.
Once you get the MAVERICKS file downloaded from the Apple APP store. THen you use the UNIBEAST for Mavericks as listed in the GUIDEBEAST section of the GUIDES.
You must understand that all of these procedures were written some time ago and only apply in general terms.
You must get SL w combo update working on your hardware and then create apple account download mavericks make USB thumb Drive to boot from w UNIBEAST.
So from another computer w a USB drive you need to get these files from Apple.
http://support.apple.com/kb/dl1399
10.6.8 Combo update version 1.1
You need to get this as well
http://support.apple.com/kb/DL1512
Apple software updater ver 1.0
ONce you have Sl 10.6.3 installed you will need to install the combo update file
copy to desktop and install
reboot
your on 10.6.8 then you copy the Software update to the desktop and install
reboot
See if you can connect to Apple App store - login - download Mavericks
Download fro TonyMac the correct UNIBEAST file to the desktop and then make the USB drive - you will need an 8 GB thumb drive that you can prepare per the GUIDEBEAST