Search results

Loading Google Results...
  1. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    All right, but I should be able to drive the monitor with the the Radeon VII DP to LG USB-C should work, right? - Any thoughts how I could achieve that? I may change to iMacPro1,1 Pro Apps (No iGPU) since I use this system for video editing with Adobe apps and Da Vinci Resolve. Like in Pics...
  2. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    In that case I used the tunderbolt 3 connectors of the z390 designare to the USB-C on the LG monitor. I knew the monitor is not Thunderbolt so that shouldn't work but I was curious to see. I also tried in both directions: USB-C from the z390 designare to DP on the Monitor - It does freeze. DP...
  3. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hey @CaseySJ Yes, The monitor works with hdmi to hdmi and DP to DP from my Radeon VII (with both Mojave and Catalina). I also tried usb-c to usb-c, it does freeze. (Both Mojave and Catalina) Then I bought a Usb-c to DP, same story, it freezes. (Both Mojave and Catalina) Also, I don't have the...
  4. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Yes, that strange name partition is still there in the Bios, but since you said it shouldn't make any problem I'm fine with that.
  5. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    @CaseySJ Now that this part is sorted let talk about the elephant in the room, I'm sorry if I'm bothering you. Please bear with me! I did the update to Catalina mainly because I got a new LG USB-C display (only USB-C, no Thunderbolt) monitor that does't work on the Mojave system. It make...
  6. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Good, thanks! I did clean CMOS and set up the BIOS again.
  7. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    VRAM Resent and cold boot didn't work. I think is also missing the OC folder you mentioned.
  8. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Ok, that's good to know. So now everything is much clear to me. Many thanks for your help!
  9. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    @CaseySJ Also, There is a strange name in the Bios Boot for the Catalina Mojave SSD: - Clover Start boot.efi at CATALINA (P5: Samsung SSD 850 EVO 250GB) Is that normal?
  10. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I'm sorry I think I didn't select properly verbose mode during that test. Anyway good news (I hope)! Now everything works as it supposed to work. -Both Mojave and Catalina boot properly. -Mojave boots with and without Catalina SSD attached, during the clover boot Mojave shows 10.14.6 version...
  11. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    After all the steps above and cleaned the NVRAM the version now shows 10.14.6 It does not boot anyway. It appears again the "No entry" symbol.
  12. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Just few more info: @CaseySJ - I tried to remove the Mojave SSD and boot only with the Catalina SSD on the system. It does boot correctly. - I tried to activate verbose mode on the Mojave boot, again only the "No entry" symbol appeared. However I did notice something that make me think I...
  13. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi @CaseySJ Thanks for your answer I'll try to be as clear as possible: Some questions/comments/statements Catalina was a fresh installation. Yes It was a fresh installation Catalina SSD has its own EFI partition with its own EFI folder. Yes, I at first I used the Catalina fresh...
  14. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Thanks for your answer Jiffyslot, However I don't think the problem is the EFI folder. The bios is pointing to the right disk: When I want to boot on the new Catalina installation I select the Catalina SSD after pressing F12 on Bios boot. The same when I want to boot to my previous Mojave, I...
  15. markart

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi everyone. I had a Mojave Clover installation that worked very well for the past 6 months, so I though it was the time to update to Catalina. I have Mojave on a Sabrent 1TB NVMe and yesterday I made a fresh Catalina Installation to a spare 250gb Samsung 850 Evo. Let call them SSD Mojave and...
  16. markart

    Z390 Designare Thunderbolt/USB-C not working & freezing

    Hi ncrispi, I think I have the same problem. I have the system running since February but I never had any thunderbolt/usb-c device to test it. Now I got a USB-C monitor (No thunderbolt/only USB-C) that I was hoping to use with this connection instead of HDMI/Displayport but the USB-C on the...
  17. markart

    USB "Disk Not Ejected Properly" during sleep error - Gigabyte Z390 Designare with memory above 2666 MHz - Mojave and Catatalina

    I find out this tool few minute ago that seems to solve the problem. I haven't test it properly yet. https://www.stclairsoft.com/Jettison/index.html It should eject automatically any drive when the system go to sleep and mount them back again on wake up. (You can decide on the app preferences...
  18. markart

    Moving from FakeSMC to VirtualSMC

    I'm running Mojave 10.14.6, so far it was quite smooth but maybe the reason is the kexts location, I'll try that soon. Thanks for the help anyway!
  19. markart

    Moving from FakeSMC to VirtualSMC

    Many thanks for your answer, I really appreciated it. I ingesting all my kexts from the EFI partition, I may migrate everything in the future to L/S but it worked fine until now. I used that link to download the 1.1.4 (I was doing that even before) but I still don't get the "VirtualSMC.efi"...
  20. markart

    Moving from FakeSMC to VirtualSMC

    Hi @Sparty , I have been able to migrate from FakeSMC to VirtualSMC following your guide - only after few attempts. The problem was that I tried first to use a newer version of VirtualSMC (the current 1.1.4) but I never been able to boot, using the 1.0.6 version you mentioned above it worked...
Back
Top