- Joined
- Aug 29, 2012
- Messages
- 28
- Motherboard
- HP Z230
- CPU
- E3-1240
- Graphics
- GTX 1060
- Mobile Phone
Hey Guys,
First i want to say that my project is NOT A REPLICA of neilhart's Shortstack Powermac G5, ( http://www.tonymacx86.com/powermac-g5/93348-neilharts-g5-short-stack-powermac-g5-mod.html )
I also had the idea of a Smaller G5 Case, because i actually do not need this much space like in a stock G5.
So i planned my idea in my head
After some time i purchased a used and damaged case for 23€ on ebay, delivered in a Mac Pro carton
The fun began !
First i started the conversation of the PSU, i've trimmed it 14cm
all the components i used were cheap and most of them lay around in my garage, so you can call this a low budget Mini Mac G5
then i went over to the actual challenge of making a tiny case.
i do not have the right equipment for cutting clean edges with my jigsaw, so it is not at a high quality level.
Here some pictures of the project.
i cutted the case in 4 pieces and reduced the measurements 13cm
Today i started to connect the frame with the case and it looks pretty okay
Also the PSU fits perfectly
I forgot to show you a picture of the rear
Here my Hardware :
Asrock H61 Board with an Intel Celeron G1610 , 4gb Ram and a 8800gt
All on ebay for 70€
Future plans :
-Mounting a supporting sheet on the other side for Motherboard standoffs and more stability
-Filling the gaps with something i do not know
-Trimming the outer case and connecting it with the inner case
-Painting.... black,white i do not know but for this decision there is so much time.
I would look forward for your opinions, ideas and feedback
Please forgive me for my poor englisch
Greetings Yannich
First i want to say that my project is NOT A REPLICA of neilhart's Shortstack Powermac G5, ( http://www.tonymacx86.com/powermac-g5/93348-neilharts-g5-short-stack-powermac-g5-mod.html )
I also had the idea of a Smaller G5 Case, because i actually do not need this much space like in a stock G5.
So i planned my idea in my head
After some time i purchased a used and damaged case for 23€ on ebay, delivered in a Mac Pro carton
The fun began !
First i started the conversation of the PSU, i've trimmed it 14cm
all the components i used were cheap and most of them lay around in my garage, so you can call this a low budget Mini Mac G5
then i went over to the actual challenge of making a tiny case.
i do not have the right equipment for cutting clean edges with my jigsaw, so it is not at a high quality level.
Here some pictures of the project.
i cutted the case in 4 pieces and reduced the measurements 13cm
Today i started to connect the frame with the case and it looks pretty okay
Also the PSU fits perfectly
I forgot to show you a picture of the rear
Here my Hardware :
Asrock H61 Board with an Intel Celeron G1610 , 4gb Ram and a 8800gt
All on ebay for 70€
Future plans :
-Mounting a supporting sheet on the other side for Motherboard standoffs and more stability
-Filling the gaps with something i do not know
-Trimming the outer case and connecting it with the inner case
-Painting.... black,white i do not know but for this decision there is so much time.
I would look forward for your opinions, ideas and feedback
Please forgive me for my poor englisch
Greetings Yannich