Contribute
Register

macOS Sierra PB: Need testers for new AMD Radeon drivers!

Status
Not open for further replies.
Gigamaxx said:
I will try to find the thread where you give directions for this. off to work, but tonight its on.

My pentium rig went through the beta 7 update but since its igfx must be disabled and pice is the only option for the card it won't boot now. I tried my Skylake build using pcie priority and it won't boot either. ill have to put my R9 270x back in the pent build.

Where are you located, Florian? I could send you one (GIGABYTE rx 460) to tinker with if your in the US.
Click to expand...

Not to hijack this thread, but it's posts like this that make me love this community.... :clap:
 
I just ordered the Gigabyte RX 460 4 g model from newegg, couple days we shall see if it works as well. Waiting for a Gigabyte RX 480 available locally in case I need to return it if it isn't compatible. I've already got enough of these on hand to deal with.
 
Pentium G3258 w/RX 480
GA-H97-D3H |  Pentium G3258 |  Radeon Other
iMac 17.1 w/RX480
GA-Z170M-D3H |  i5 6500 |  Radeon Other
Would be nice to know which GPU is supported in Sierra. Would prefer to get the Sapphire Nitro rx480, but seems like I'll have to go with a Gigabyte rx460.. or would it be better to get a gtx970 or a r9 390 at this point, because Sierra might be **** and I might want to stick to yosemite??
 
Hopefully by the end of Beta the 480 will be supported.
 
Gigamaxx said:
I will try to find the thread where you give directions for this. off to work, but tonight its on.
Click to expand...
• Just make a dumb of your VBIOS with DPCIManager by clicking the little "EYE"-button left side of RX460 gfx name

• Rename the saved VBIOS file to 1002_67ef.rom and drop the file (filesize should be around 64kb) into the following location:
your EFI partition ---> EFI/CLOVER/ROM

• within your config.plist insert into section Graphics the following code:
<key>LoadVBios</key>
<true/>

• Reboot system and see what happens.
 
Last edited:
Mork_vom_Ork said:
• Just make a dumb of your VBIOS with DPCIManager by clicking the little "EYE"-button left side of RX460 gfx name

• Rename the saved VBIOS file to 1002_67ef.rom and drop the file (filesize should be around 64kb) into the following location:
your EFI partition ---> EFI/CLOVER/ROM

• within your config.plist insert into section Graphics the following code:
<key>LoadVBios</key>
<true/>

• Reboot system and see what happens.
Click to expand...

thanks, i will try tonight and post data if successful.
 
Pentium G3258 w/RX 480
GA-H97-D3H |  Pentium G3258 |  Radeon Other
iMac 17.1 w/RX480
GA-Z170M-D3H |  i5 6500 |  Radeon Other
gigamaxx can you run unigene heaven with the ga card with no freezes and do you need fixdisplay in clover thx
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top